How to make old Beijing cloth shoes?

Old Beijing cloth shoes Old Beijing cloth shoes make soles: a. Make soles first. Dream back to the Tang Dynasty. Recommended method: Stick a relatively strong cloth layer by layer with paste (bad glue) and stick it on the door panel, chopping board and table. After drying, the sole is ready. B. Cut out four soles and two heels according to the pattern or the baby's foot shape. C. cut out the white binding. Stick the binding on the edges of two soles and two heels, cut out two white cloth soles, which are 1.5cm wider than the soles, wrap the soles, stick them with paste, and flatten them. D. Fold the two soles together, clamp the heels in the corresponding parts of the middle layer, stick them together with paste after neat yards, then sew them around the soles with a needle, and then sew them from the middle. E. Note that when taking the flute, you must use solid thread and 6 strands of thick polyester thread to form a heel; Also, every time you have to stick a hole with an awl and then stick the needle in it; When pulling the wire, be sure to tighten it, so that the foundation is firm and not easy to wear. Production of uppers of old Beijing cloth shoes: a. Paste cloth on both sides with paste (bad glue), paste two layers of cloth on the outer layer and paste a layer of soft flannel on the inner layer, and cut out a pair of upper patterns according to the shoe patterns. B. Sew the vamp and knock it flat with scissors. C cut white and other colors (just match the upper), the width of the binding cloth is about 2cm, and other colors are tied on the upper edge of the upper (just match the upper). The lower edge of the vamp is bound with a white bandage. Old Beijing cloth shoes as insoles: take several layers of soft cloth, cut out two soles according to the pattern, wrap white edges around them, and use a sewing machine to make concentric circles along the edges, dreaming of the insoles recommended by the Tang Dynasty. Wearing shoes for old Beijing cloth shoes: take the foundation, insole and vamp well, and sew a circle around it, and you're done.