Wrap method of finger protection bandage

Wrap method of finger protection bandage

Finger protection bandage method, in life, people always hurt their hands for some reasons or accidentally. We need to bandage our hands at this time, but many people don't. The following is to share the method of finger protection bandage for everyone.

Finger protection bandage method 1 Generally speaking, fingers should be bandaged after trauma or operation to achieve the purpose of compression hemostasis or prevention of infection. There are special treatment methods and precautions for finger dressing.

1. Before bandaging: When bandaging fingers, first bandaging them with clean wounds. The dressing with wound inside should be sterile, and the appropriate size of gauze should be selected. If it is a bandage, you should choose a narrow bandage because your fingers are small.

2. When bandaging, first put the patient's finger in a comfortable position and bandaging it from the distal end of the finger to the proximal end to promote venous return. Go around the same place twice first, and then gradually go around the near end. The pressure on each lap should be appropriate to avoid being too tight or too loose. Too tight will affect blood flow, too loose will easily fall off; Be sure to approach slowly after dressing, and the pressure on each lap should be appropriate to avoid being too tight. Too tight will affect blood flow, too loose will easily fall off;

3. After wrapping: after wrapping, fix it with adhesive tape, and finally fix one end in the palm of your hand, so that it will not fall off easily. You can also mark the outermost layer of the dressing to indicate the time of dressing change, so as to change the dressing regularly.

Finger protection bandage method 2 1. First, after opening the hand bandage, open your fingers and wrap the rope around your thumb.

Next, wrap the bandage around your wrist for two or three times, and then wrap it around your palm for four times.

3. Then wrap the bandage around the joint between the thumb root and wrist through the inside of the palm, and stretch it between the little finger and the ring finger. Wrap each finger in the same way. Finally, pull the bandage from the back of the thumb to the top of the back of the hand and wrap it around the palm twice.

4. Finally, pull the bandage to the back of your hand, from below to your thumb. In the back, around the thumb. Pull the bandage from the back of the hand to the wrist, wrap it around the wrist for 3 ~ 5 times, and fix it with nylon.

When playing volleyball, delicate passing skills require strong finger and wrist strength, strong finger and wrist control ability and high coordination. Passing is mostly passing the ball sent by teammates, changing the direction, radian and speed.

The quality of passing depends not only on your own skills, but also on the conditions created by your peers. Therefore, to choose the appropriate wrist guard, it is best to use finger bandage to play volleyball.

After a long time, it is not easy to get hurt. It was easy at first, and the muscle strength of fingers was not strong. But if it's strong, you still need to mix bandages on your fingers. Finger bandage can be wrapped around your fingers, which can protect your fingers and prevent them from being injured.

Banding method of finger protection bandage 3 First, ring bandaging method:

It is the basic dressing method for all kinds of wounds, and the wound on the palm is easier to dress, so you can choose this method.

1. Disinfect the wound and wipe it with a sterile cotton ball to prevent infection;

2. After the wound is disinfected, it is necessary to press the wound with sterile or clean dressing;

3. Wrap 6-8 layers of gauze around the wound, then bandage the wound and fix the gauze;

4. Finally, cut off the extra bandage. In the process of winding, the strength must be light, the bandage should not be wrapped too tightly, and the tightness should be moderate.

Second, the "8" bandage method:

When this method is used for dressing, it is necessary to connect the wound of the palm with the joint with a bandage to achieve the purpose of dressing.

1. Before dressing, be sure to clean the wound and keep it clean.

2. Use sterile or clean dressing to cover the wound, and clean gauze or sanitary cotton can be used as the inner dressing;

3, winding the injured part of the palm and wrist, generally starting from the wrist, winding twice in one circle to form an "8" shape;

4. After winding, it is necessary to fix the tail of the bandage at the wrist and cut off the extra bandage.

No matter which of the above dressing methods is adopted, before dressing, the wound should be cleaned, disinfected and kept clean to prevent unnecessary infection. When dressing, keep the strength and tightness moderate. In addition, pay more attention to rest after dressing, especially the injured part of the palm, and don't be too tired. In addition, tetanus should be injected under the guidance of a doctor, or anti-inflammatory drugs such as cefixime and levofloxacin should be used to prevent wound infection.

Finger protection bandage method 4 1. If the finger is not broken after the injury, you can first rinse the wound with clear water, then disinfect it with iodophor, and then choose clean gauze to directly cover the wound and apply pressure to bandage it to stop bleeding. If there is more bleeding or the effect of compression hemostasis is poor, consider applying pressure at the root of finger or wrist to stop bleeding, and then wrap it with sterile dressing.

If the finger is cut off, first press the proximal wound with clean gauze. The severed finger was wrapped with a clean dressing, put into a plastic bag, stored in an ice box at low temperature, and sent to the hospital for replantation. After dressing, patients need to be advised to inject tetanus.

2. After the palm is injured, the wound must be treated in a complete and standardized way before dressing, including washing the wound with clear water or running water, removing foreign bodies in the wound and blood scabs around the wound, and then disinfecting with iodophor, 0.9% normal saline and chlorhexidine solution before dressing.

The dressing method is to stick a narrow bandage on the first knuckle of the injured finger and put the middle point on the middle finger. The narrow bandage wraps around the wrist at both ends, crosses the inside, covers forward from both sides of the back of the hand, and returns to the first knuckle of the finger. Each of the two bands covers about 3 fingers, that is, both bands cover the middle finger.

Then hold both ends, cross and gently pull down in the palm direction, and you can wrap the fist of the wounded. The ends of the narrow bandage are wrapped around the wrist, and a strong and easy knot is tied on the back of the hand. The dressing of the injured palm is completed. If the wound is large, it needs surgical suture and then bandaged with gauze. If it is caused by iron injury, it is recommended that the patient be injected with tetanus antitoxin.

The hand is the fragile part. If the finger is not broken after the injury, it can be wrapped with clean gauze or dressing. If you break your finger, you need to wrap it with a clean dressing and send it to the hospital for replantation. Palm injury also needs cleaning and disinfection specifications, and tetanus antitoxin treatment is injected at the same time.