Monastery statues and wall painting materials used and steps

1.Wall treatment

The wall of the grass-roots treatment is more important, usually painted on the wall of the latex paint, so the wall leveling, primer, pattern planning and so on to be prepared in advance.

2. Primer

No art skills, we have to draw a good primer on the wall, use the pen to gently outline the draft, satisfied with the color before you can color, otherwise it is not easy to modify.

3. Matching paint

Buy pigments against the pattern effect, such as the purchase of latex paint toning effect can not grasp, do not rush to make a decision in the paint store, you can bring home the color palette or paint samples, respectively, in the natural light and the night under the lights to observe the paint color. High-gloss paint will make the room look brighter, but also easy to highlight the shortcomings of the wall, if the wall is not too flat, it is recommended to use flat paint. Paint should never be too thin, or it will easily leave run marks on the wall. Acrylic paints can be colored as needed, and brush down carefully.

4. Preparing for color

First, spread newspaper all over the wall in front of the wall you want to graffiti, so as not to dirty the ground. When hand-painting a simple pattern of color, first draw the outline on a thin and absorbent paper, then cut it out and place it on the wall in the appropriate place, and color it by topography. If you are afraid of breaking the wall, the most convenient way is to take the airbrush sticker, after spraying the picture engraved, with stickers on the wall. Acrylic paint in painting, if you find a mistake, you can take a wet rag to wipe off and repaint, but latex paint can not be used this way.

5. Maintenance

After painting, we should ventilate and wait for the wall to dry before touching. Although acrylic paint is waterproof and scratch-resistant after drying, it should not be scrubbed hard with water.596242459(qq)