How to clean slate

1, first remove the dust and other attachments on the board surface with a clean towel, and then wipe them with a slightly wet rag. For stains that are difficult to clean, wipe them with a special cleaner. After cleaning with a small amount of water, finally wipe off the water stains on the surface of the green slate. When wiping, you should avoid washing directly with a large amount of water, so as not to cause water stains to penetrate into the plate, which will lead to water stains.

2. Make sure the bluestone is dry in daily life. The surface of the bluestone slab should be naturally ventilated and dried, and drying methods such as high temperature and fire baking cannot be used to avoid causing certain damage to the bluestone slab.

3. For stains that are difficult to clean on the surface of the slate, hard objects such as steel balls should be avoided when cleaning, because it will cause certain wear on the surface of the slate.

Only by proper maintenance can the service life of slate be greatly prolonged, its original luster be maintained and the occurrence of stone lesions be reduced.

The difference between green flag burning noodles and natural noodles.

It is very necessary to process and make stone now, and only in this way can we better meet our needs, but there are also natural surfaces in life. So what's the difference between these two kinds of bluestones?

1. Stone is collected from natural rock mass, and the surface presents a natural uneven effect before treatment, with a height difference of 3-6 cm. This kind of natural board is not suitable for laying on the ground, and can be used for flower troughs, steps and other applications.

2. The burned surface of bluestone is rough. This kind of noodles is mainly used for indoor decoration such as floors or commercial buildings, which further saves our decoration cost and highlights the natural atmosphere in high-end places.

3. Compared with natural panels, the texture and characteristics of burned boards are far from each other, which is also the versatility of stone. After burning or rough chiseling, the surface of the plate becomes a little uneven.

4. The green slate should be processed reasonably in the process of processing, so as to ensure that our production mode is more in line with our use in the decoration process and reduce our production cost.