How to use a slingshot gun

Question 1: How to use a slingshot gun how to load bullets ah Advanced things, have never heard of

Question 2: Who knows how to use a slingshot gun? Seek to understand This is into the cloud dragon, leather band power, can store the bullet, dual-purpose, can play beads and arrows. It can also be displayed as a craft.

Question 3: Who knows how to install that slingshot gun Against the picture is very simple

Question 4: How to make a slingshot gun How to make a wooden slingshot

Wooden choices:

Oil tea

Date palm

Beechwood

Cinnamon wood

Mulberry

Yellow poplar

Forks do not need to be square, but thick

Wood treatment:

Boil in brine:

Wax the three heads of the original fork,

when you cut off the fork, leave the three heads a little longer,

and tighten it with a wire,

boiled in brine for about

30-50

minutes. Then dry. Boiling wood pitchforks in salt water does not prevent cracking. Instead of preventing cracking, it may cause the cracks to increase.

The purpose of boiling in salt water is to kill parasites or eggs and prevent insect infestation.

Baking: wire shaping, tie the port, open fire baking

20-30

minutes, two days in the shade

Microwave drying method: peeling the wooden fork, and then put it into the microwave oven on high

20

seconds, take it out and let it cool (warm can also be)

; and then

Repeat the above steps! ***

4

times, note:

1

, high heat;

2

,

20

seconds;

3

, take out and wait for the temperature to come down (not scalding) and then the next

step

natural shade drying: three Cross-section sealing wax, do not peel with a snakeskin bag, where it does not matter, generally three months before starting

action, so that the effect has been very good, but the premise is to take the length of the original fork to leave a little leeway.

The slowest

:

half a month with water, and then boiled in salt water to kill insects and eggs, and then tie the three heads with wire, drying in the shade for about a month.

Slingshot processing:

(Handy tools are a prerequisite for a good wooden pitchfork slingshot)

1

,

Peeled,

First, conceptualize the outline of the paper,

with a pen in the material to draw the approximate shape of the bow,

and then according to the shape of the drawing of the slow filing,

with the pen to draw the shape is

the shape is

the shape is

the shape is

the shape is

the shape is not the same.

Drawing the shape with a pen is the first step in the DIY

process, and it allows you to get the symmetry of the bow.

2

, roughing with gimlets (knife, axe, saw)

, sawing off the ends of the branches, applying walnut oil, and then continue the next day

3

, wood file repair

4

, fine-toothed files made of hacksaw fine-toothed and then

80-100-300-800-1500

sanding.

of the emery cloth sanding

,

old cotton cloth (or old towel) slowly

sassafras for polishing, soon you will find the luster of the

Boil Oil Boil Wax:

walnut oil wipe, tung oil or white candles

on the wax: that is, bake the bow hot and let the wax soak in

electric blowing

,

the wax on the wax: that is, baking the bow hot, let the wax soak in

electric blowing

The wax is evenly dripped on the

Y

with the hairdryer turned on to the hottest baking,

so

3-4

times,

with a soft fine cloth to wipe the wax

clean can be! I absolutely guarantee that it will not crack.

Steam the wax: Wrap the wax and the fork in plastic wrap, put it in a pot and steam it for

20

minutes

Boil the wax: Put the paraffin wax in a small pot and put it on the stove to heat up the water, turn off the heat when you see the paraffin wax temperature rise and start to emit a little bit of smoke.

This is the hot wax to squeeze out the water inside the fork,

a few minutes later, the temperature of the paraffin wax decreases, the bubbles will be reduced, then open the fire again, the paraffin wax is heated again, again heated to a little smoke

smoke until, pay attention to the process of heating the bow with chopsticks to keep turning the bow, lest the bow of a part of the bottom of the pot by the roasted paste, turn off the fire

after the bow does not need to turn over

so repeated on and off the fire

the bow of the bow is not a good idea, but it's a good idea. The bow will not need to be turned over after the heat is turned off. Repeat this process 3 times and you're almost done. Take the bow out and put it in a ventilated place,

20

minutes to

After the bow cools down, use a cloth or old clothes to polish the bow, that is, pump the cloth back and forth, after polishing, the bow is not played for a long time, every six months

to the bow on the wax.

Drill holes and grooves

:

In a word, the wooden fork craft is good, look at the holes.

Drilling, sanding, rope sanding

The holes and slots of the wooden fork are generally of four types: small holes, small holes and circle slots, card ball, and large eye

holes,

Oil:

If you have the conditions, you can put a little walnut oil, you can't buy and knock a couple of walnuts, crush them, and then wrap them in a cloth and squeeze them, and then the walnut oil will come out.

With a little walnut oil. Wipe on

After the wooden fork will have a glossy finish. >>

Question 5: How to install a slingshot gun to shoot fishers There is a card card on the

Question 6: How to install a slingshot gun scope This mainly depends on the support for the sights belongs to what kind of scope

Now there are mainly three major categories, the first is the most popular in the developed countries now Picatinny rails, like spelling blocks can be arbitrarily mounted on all kinds of support for the Tactical equipment, more than just the scope. Can be said to be the mainstream of the future modular development of man-portable weapons

The second category is to maintain the tradition of the last century, the use of specialized targeting equipment, the gun family style, such as AK as the representative of Russian rifles, their tactical side-mounted is universal, the use of targeting equipment is the attached sights of the bridge, the use of the mirror can be placed only in the side-mounted, and basically the same as a convenient Picatinny rail, but the universality of less than Picatinny rails, the choice of sights on the limitations of the Picatinny rail.

The third is the most backward, is the most old-fashioned way of mounting the sights, that is, a gun for one use, such as the scope of a class of equipment are dedicated to the gun, there is no universality, and some of the targeting equipment is even customized in the factory on the weapon, it can not be disassembled

First of all, you have to be supporting

Question 7: How to aim a slingshot gun are all equipped with the aiming of the novice I'm not sure if you're a good shot, but I'm a good shot. With bird-seeking lens is best, do not want 4x20 optical meow eyepiece is too small, not good aiming.

Question 8: I use a slingshot gun to open a target range to open to, kinetic weapons, impossible

Question 9: How powerful is the slingshot gun First of all, the slingshot gun this kind of should be subject to control, do not recommend to play, and here to discuss just. Affect the power of the slingshot gun should have four factors, 1 is the length of the leather band, relatively long some of the power of some, but there is a degree; 2 is the tension of the leather band, in the case of the tension can be pulled to the best distance position of the leather band, leather band tension, the larger the power is also the larger; 3 is the size of the marbles, the general power of the marbles large, but the size of the marbles and the tension of the leather band match the size of the marbles, not enough tension can not hit the large marble power instead of smaller, this condition is the best to test the best, and the best thing is to play a little. This is the best condition to test to determine (momentum test). 4 is from the bow to launch the time should be as short as possible in order to play the maximum power, this is not easy to do for the slingshot gun, but just as an influence factor. If you want to increase the power again, then only crossbow, and with steel shrapnel tension fatigue is much smaller than with leather bands.