How to draw the plane of the carton?

1. In Ai software, create an 800*800 document, select the rectangle tool, draw two rectangular figures and fill them with colors, as shown in the figure.

2. Then select the rectangle tool, draw two rectangular figures and fill them with colors, as shown in the figure.

3. Then select the rounded rectangle tool, draw a rounded figure and fill it with color, as shown in the figure.

4. Next, select the rectangle tool, draw a rectangle figure and fill it with color, as shown in the figure.

5. Finally, right-click all the graphics to group, and then enter Effect-Stylization-Projection, as shown in the figure.

6. The effect diagram is as follows:

Look at the thickness of the needle. If it is a distance, then the inner diameter of the carton is the length (14*5+4*0.5)* width 55* height 60cm. You only need to tell the carton factory the empty container size (that is, the inner diameter size), the product weight and the shipping mark. There is no need to draw drawings.

One. Use of carton: 1. General cartons can be used for transportation and cushioning packaging, 2. Choose beautifully printed cartons for sales packaging.

Two. Choose the carton structure according to the weight of the packaged products: 1. Lighter products can use three-layer cartons, 2. Heavier products generally choose five-layer cartons, 3. For particularly heavy products, such as products weighing more than 100~200kg, choose seven-layer cartons.

Three. Size measurement: 1. Please stack products according to the number of products and measure the length, width and height. Try not to use the size of a product to calculate the carton size, especially when the number of products is large, the error will be great. The size at this time is the net size of the inner diameter of the packing box. Don't reverse the width and height direction, or your product may not be placed in a safe direction after the box is produced. 2. If your product is expensive, it is suggested that the total weight of the package should not exceed 25kg, because for well-known reasons, in most cases, it is rough manual loading and unloading. 3. Try to choose a narrower carton size, which will save materials and reduce costs.

Four. Material selection of packing box: paper standard is divided into kraft paper, A, B, C and D grades, and corrugated paper is divided into A, B, C and D grades. The weight of paper is generally 350g ~ 1 10g per square meter. The higher the weight of paper and gram, the higher the strength of the packing box. The higher the paper standard, the greater the gram weight, the more layers, the less the batch size, and the higher the carton cost.

Five. The packing box should be printed on it, and the printed words, patterns and colors should be determined. The printed words on ordinary packing boxes are called marks abroad, which are written marks of the contents of the package, the size, weight and place of origin of the package, and are also common printed signs, such as moisture-proof, upward-facing, fragile, anti-hook and sun protection. The plan of a carton is also a box, because the plan means what you see when you look down from directly above. The box is square, so looking down from directly above is square or rectangular.

Unfolded drawing needs to draw six faces, as long as you know the length, width and height, then draw them one by one and put them together again. Of course, if you are skilled or have good 3D thinking, you can choose to draw them at the same time.

You just need to tell the manufacturer the size requirements.

They will use the computer to design a scheme for you to choose from. Without drawing, tell him that the inner diameter of the carton can be 70.5X55.5X60.5CM