What is the cheapest and most durable material for partition wall

Partition wall of the cheapest and durable materials are bricklaying, prefabricated partition boards, gypsum keel, glass block.

1, bricklaying

There are four main methods of bricklaying: "three one" bricklaying method, pressure slurry method, scraping method, full gray method. The most commonly used is the "three a bricklaying method", the operating principle is a shovel of ash, a brick, a squeeze rub, and will be squeezed out of the mortar scraping.

2, prefabricated soundproof wall

Prefabricated soundproof wall fan need to refer to the site to measure the size of the wall to customize, but also need to refer to the track installation and other prefabricated.

3, gypsum keel

Advantages: firm, sound insulation, easy to construct. Cold and warm air is not easy to lose. Disadvantages: afraid of moisture.

4, glass block

Glass block is a transparent or color glass material pressed and shaped block, or hollow box, larger glass products.

Partition wall notes

1, lightweight partition wall construction, fixing method should be in line with the design of the art.

2, lightweight partition wall materials in the transportation and installation, should be light and light, shall not damage the surface and corners.

3, material storage should be appropriate to prevent moisture deformation.

4, when the lower end of the lightweight partition wall covered with wooden skirting, the veneer should be left with the ground 20-30mm gap.

5, when using marble, tile, terrazzo and other skirting board, the lower end of the panel should be flush with the skirting board, the joints should be tight.