Which is the shaft on the 63-ton punching machine?

The x-axis on the 63-ton punching machine is an axis.

Axis 1. X: The manipulator of the punching machine is defined as the axis that moves back and forth transversely, and the magnitude of the transverse stroke depends on the transverse distance between the punching machine and the punching machine tray.

2.y axis: The punch manipulator is defined as the axis that moves back and forth laterally, and the magnitude of the lateral stroke depends on whether the special manipulator for injection molding machine places the parts on the side or behind the injection molding machine. After the product is taken out of the mold of the injection molding machine by using this axial stroke, the product moves laterally to the designated area outside the safety door.

3.z axis: The special manipulator is defined as vertical up-and-down stroke, which is determined by the height of the product when it is installed on the injection molding machine. That is to say, the special manipulator for injection molding machine must be high enough to take the parts out of the mold of injection molding machine, move the products out of the safety door of injection molding machine smoothly, and put down the parts at a reasonable height from the ground outside the injection molding machine.