The water heater was removed?

1. First, prepare relevant disassembly tools, such as electric drill, adjustable wrench, screwdriver and soap for disassembly. 2. After the tools are ready, turn off the power supply of the water heater, and then turn off the gas pipeline switch to ensure the safety during removal. 3. After removing the water inlet port of the water heater, fix the water heater with a screwdriver and a screwdriver, and then remove the exhaust pipe. 4. When all the interfaces and pipes of the water heater are removed, slowly unscrew the screws for fixing the water heater and gently remove the machine.

/Related knowledge science:

1. After the water heater is disassembled, if you want to continue to use it, you can thoroughly clean the inner container of the water heater to maintain the water quality for later use.

2. Drain the water in the inner tank of the water heater first, and discharge the sewage and impurities deposited in the inner tank for a long time. If left untreated for a long time, impurities in the water will adhere to the inner container, affecting the quality of daily effluent, and even causing skin allergies in severe cases.

3. After the sewage and impurities are discharged, you can boil a pot of hot water, then pour it into the inner container, and after the impurities are softened for a period of time, scrub them with a special brush.

4. After cleaning, hang the liner upside down to dry, and then put it back into the clean liner.