Make two sliding doors in the kitchen? Three? Four fans

The number of kitchen sliding doors mainly depends on the width of the kitchen door and the owner's preference.

If space permits, if you live in a high-rise building, 3~4 fans are recommended. Two fans on both sides can be fixed, and the middle one is movable, so move to both sides! A track is enough, and a lighting structure can be considered. It would be more atmospheric to make two villas or something.

There are many designs for kitchen doors. According to the requirements of lighting, generally speaking, transparent glass doors are a common choice for kitchen doors. Specifically, the kitchen door can use a large area of glass, which can not only isolate the oil smoke, but also show the cabinets carefully selected by the owner. In traditional architectural design, the opening of the kitchen door is slightly smaller than that of the bedroom, generally 750mm to 800mm, and the door leaf is about 720 mm.

Selection skills:

1. Look at the door cover.

The material of the door cover, the deformation and sagging of the door are actually the problems of the door cover. There are mainly two kinds of door covers on the market, density board and solid wood multilayer board. Density board is made of wheat orange, straw, sugarcane and other materials cut into powder and pressed. Although the balance is good, it is easy to crack and deform, and the nail holding force of wood is poor. Multi-layer solid wood veneer adopts multi-layer solid wood veneer, which has strong nail-eating ability, good stability, waterproof and moisture-proof, and is the first choice for home wooden doors.

2. Look at the material.

There are also many kinds of materials. Is environmental protection up to standard? It depends on whether I can provide you with a written guarantee. If you say anything without evidence, it will count in the contract. Solid wood materials have good cost performance; Doors made of environmentally friendly metal are too heavy, which will fall down for a long time and be easily damaged; Painted door panels look good, but they are afraid of touching and scratching; Blister door panels will bubble after a long time; The fireproof board has good durability and roughness resistance.

3. Look at the manufacturer's production equipment.

Whether the equipment is complete or not, good production equipment can make beautiful painting effects; In this way, the moisture content of wood can be controlled, the probability of wood cracking and deformation can be reduced, and the service life of products can be prolonged.

4. Look at the product path.

It's best to choose products directly from manufacturers to avoid the difference between agents and there is no guarantee after sale. Look at the way of agency: you only need to pay attention to whether the label is a dealer or a manufacturer, and whether it is a company is clear at a glance.

5. The importance of installation.

As the saying goes, "seven points to do, three points to pack." Visible the importance of installation; The installation is not done well, which directly affects the future use effect. Therefore, it is necessary to confirm whether their installers are trained professional masters and have certificates.