Correct solution of fishing drift adjustment

For beginners of fishing, the first important link to master is drifting. Drifting is a fisherman's eye, and the foraging action of fish under water will be reflected in drifting. If you want to catch a good fish, you must learn how to adjust the drift. A seemingly simple float is ever-changing, and every change may affect your catch.

Beginners often don't know how to choose a float. Sometimes they just take a float, plug it in the float seat and start fishing. At the end of the day, they didn't catch many fish, not because there were no fish underwater, but because the float was not properly adjusted. The following is a detailed explanation of the adjustment method of floating for the majority of fishermen by means of illustrations.

First, drift analysis

In the use of floats, generally follow the principles of small floats for fishing small fish, large floats for fishing big fish, small floats for fishing shallow water and large floats for fishing deep water. Because there are many kinds of floating modes, each floating mode adapts to different fish conditions.

1, soft tail drift: only used in two cases, ① when the fish mouth is light in winter; (2) When the fish's mouth slips.

2, slender body, short feet, hard tail 1 1~ 13 mesh drift: fishing for small crucian carp, fishing for bottom drift.

3, the body is slender, the feet are long, and the tail is long and hard: fishing for big crucian carp.

4, drifting fat: fishing carp.

5. At present, a popular float is jujube pit float, jujube pit float, with long tail, short body, quick turning over and slow and steady sinking, which can be used for bottom fishing. When there is fish to eat, whether the next meal is on it or not, the action is more obvious. Good wind and wave resistance, higher stability than common long-body buoys when used in running water, short-tailed and short-purpose jujube stone floating, quick turnover and few blind spots, so it is the best choice for fishing and Shui Pi.

Bleaching of long tail jujube pit is more comprehensive in use. When attacking, raise the number of eyes a little. With a good bait, you can search the fish layer by layer during the whole process from turning over after entering the water to the bait in place. Then fish in the fixed layer or control the fish to rise or fall for food.

Compared with the general standard date stone trowel, it has incomparable advantages. When the density of raw fish and fish is relatively high, take an attack. When defending, the lower the number of eyes, the better, and you can reach the bottom quickly. Generally, when fishing squid or smooth-mouthed fish, it is the most effective defense type to cooperate with the bait state, appropriately extend the length of the auxiliary line, or cooperate with the lead fishing method. Beginners may wish to choose a jujube core drift suitable for fishing.

Second, the drift adjustment diagram

Illustration of adjusting four fishing and two fishing

When the float moves up, the state of the bait in the water changes when it changes to four fishing, three fishing, four fishing and five fishing.

Third, explain the process of floating fishing in detail.

1, roughly find the bottom

Don't hang the auxiliary line. The lead base is hung with heavy lead. The weight of lead is greater than the buoyancy of the float, and the float is completely submerged. Pull the float up gradually until one eye is exposed, and the top space bean is next to the second space bean to complete the positioning. Remember, don't touch the top space bean until the fishing is over.

2. Adjust your eyes

Pull the float down, throw it into the water until it is completely submerged, and then gradually cut the lead until the required mesh is exposed. This is eye adjustment.

3. Set the basic principles for adjusting eyes and fishing purposes.

7-mesh soft tail drift and bait rubbing: adjust 4-5 to catch 2.

7-mesh soft tail drift bait: adjust 3-4 to catch 2

Hard and thin tail rubbing bait: adjust 7-9 meshes and fish 2-3 meshes.

Hard thin tail bait: adjust 5-7 meshes and fish 2-3 meshes.

High fishing eyes, dull fishing; Fishing low, fishing spirit.

Fine-tune the above adjustment according to the weather, season, hook weight, bait specific gravity and bait ball size.

Step 4 Find the bottom exactly

Hang the sub-line, move the float, adjust the distance between the position of the float seat and the positioning position of the upper space bean to be approximately equal to the length of the sub-line, lower the hook and rub the bait to hang a big bait ball to find the bottom (also make a nest), so that the float is exposed to the water for 2 eyes, and continue to pull up the float for 2 cm. If the float shows more than 3 meshes, it means that it has passed the bottom, and the float is pulled back to 2 cm. This action is called reverse bottom hunting, and then the bait of normal fishing size is hung.

5. Adjustment process of trial catch

(1) There is no fish in the mouth: if you fish too hard, pull up and float for 2CM (less than 5 times in a row), and the fish that catches the upper lip for more than 2 times in a row is the right mouth.

(2) The Chinese fish is on the mouth or chin, indicating that the fishing is too dull. Pull up the float 1 cm at a time and find the right mouth until the fish is on the upper lip for more than two times.

(3) Grasping the bottom without a mouth: Every time you pull down the float 15 cm, you can find the water layer where the fish is, which belongs to the category of floating fishing from the bottom-fishing a standard depth. Put it another way.

Fourth, the lead fishing method

1, scope of application

Used when running water or small miscellaneous fish are hooked, the fishing method is similar to traditional fishing.

2. Lead Operation and Bleaching Steps

(1) When there is no hook, heavy lead will come to the bottom.

(2) The float is pulled down by 20CM, and the lead skin is cut flat.

(3) The space beans on the lead base bloom for 3-5cm.

(4) Hook, pull up the float until 2-6 meshes are exposed, which can be used for fishing, and more meshes are exposed when the current is fast.

3. Matters needing attention in running lead fishing method

(1) In the running water environment, the float should be as large as possible with strong positioning ability.

(2) The sub-line within10cm should be as short as possible, because the lead fishing is extremely blunt, and the short sub-line can amplify the signal.

(3) To grasp the movements up and down, you can catch fish.

(4) The bait can be properly adhered.

V. Detailed steps of searching

1. If the drift phase only rises slowly without falling, or the drift phase only falls slowly after rising, you can adjust it by pulling down the drift until it rises slowly, and then pause a little.

2. The drift phase only rises slowly, but there is no next decline. It is ineffective to adjust the fish eye by pulling down the float, which is mostly related to the state and size of the bait. The bait state and bait application method can be adjusted in time before inquiry and exploration.

3. If the floating phase only rises slowly, but there is no next bite, and adjusting the fish eye, adjusting the bait state and feeding the bait are all ineffective, then you can reduce the lead and find another bite until there is a simple slight bite and fish.

4. The drift can't be lowered to the set fishing target, or the top can't be dropped for a long time. After excluding factors such as inaccurate throwing and bait loss, it is mostly caused by fish interface. You can also pull down the drift adjustment or reduce the lead to find the mouth.

There are many fish in the nest, but there is still no mouth to adjust the fishing eyes. Check the hook sticking rate and atomization rate of bait. At the same time, it is necessary to check whether the fishing is too dull, whether the drift fishing and bait fall into the virtual sediment layer that the fish mouth does not admit.

6. The adjustment of fisheye dullness belongs to no mouth, and the adjustment of bait state and bait throwing method are also invalid. It can reduce lead, increase eye adjustment, increase the carrying capacity of bait, expand the range of eye adjustment, let bait have more levels to choose from at the virtual bottom, and then find bait again until there is a simple slight mouth opening, and the fish is caught.

7. After the drift rises slowly, it is a clear positive phase, but it will always leak fish, which is related to the state of bait. The most common thing is that the bait is too hard and too big. You should adjust the bait status and feeding method in time before you ask questions.

8. There was a direct bite in the drifting stage, but many fish were not caught. You can pull up the drift and adjust it. You can find the standard mouth and catch fish.

Six, different seasons and different fish bleaching

When fishing 1 mesh, 2-mesh or 3-mesh without hooks, it is suitable for hanging earthworms or red worms, or small miscellaneous fish. At this time, the sub-line is short and the two baits belong to undercover state.

Adjusting four eyes to catch four eyes is suitable for carp fishing, and fishing is slower. At this point, the two decoys belong to the undercover state.