How to judge whether it is a fishing rod?

1, fishing rod strength. The main use effect of the fishing rod is achieved through the bending curve of the fishing rod, so the fishing rod cannot bend a certain section and is easy to break. Many fishermen are worried that the tip is too thin and the strength is not enough when purchasing fishing rods, so it is unscientific to conduct bending experiments on the tip. Some fishing rods are overstocked and feel too soft, and some fishing friends are also worried that the strength is not enough. Don't worry about this, because the fishing rod should be stressed as a whole, not just a certain section. Therefore, judging the strength of a fishing rod requires an overall experiment. The method can be as follows: one person holds the back end of the fishing rod, the other person holds the thinnest end of the fishing rod, and the person holding the back end forcibly moves the fishing rod upward. If the arc is continuous or curved, it will naturally pass.

2. Rust prevention and corrosion protection. Fishing rods are often wet during use, especially when the salt content of seawater is high, and many stainless steel fittings will rust due to material or use problems. After the fishing rod is used, it is required to open the thread of the tail piece, wash sand, salt and other dirt back and forth with clear water, then dry the water on the surface with a dry rag, and finally put it in a cool and ventilated environment to dry and collect. If there is dirt that cannot be cleaned, please use soapy water. Do not use organic solvents, such as gasoline and thin or hard brushes. It is particularly important to note that the fishing rod cannot be placed in a high-temperature and closed place such as the trunk of a car for a long time. All the above work is to prevent the metal fittings from rusting and the paint on the surface of the rod body from discoloring, blistering and falling off.