There are several ways to tile how to better lay a good tile

Tile method:

1, dry paving method

Dry paving method is the sand and cement in accordance with the ratio of 3:1 mixed with a small amount of water, cement and sand as long as the mixture can be clenched into a ball of viscosity, and then will be mixed with sand and cement paved in the ground, with a flat plate to the surface feel flat, on the back of the tiles smeared with a very high degree of viscosity of the cement, put the tiles Put on the ground, with a rubber hammer to knock solid on the completion of the dry paving method is mainly used for the floor tile paving. Dry paving mortar thickness, high cost, floor tile leveling, not easy to deform, not easy to drum, good results.

2, wet paving method

Tiling method there is a wet paving method, it is the sand and cement in accordance with the ratio of 2:1 mixed with water and good, the amount of water to be more, so that the consistency of sand and cement is higher, and then coated to the back of the tiles soaked with water to stick to the wall, and the wet paving hair is mainly used in the wall tile paving. Wet paving method in the solidification process of water evaporation, easy to appear small bubbles, the emergence of voids, resulting in the phenomenon of hollow drums.

Better paving tiles:

Before preparing to pave the tiles, it is important to understand the characteristics of the tiles, because the tiles are very many kinds of tiles, each tile it's different characteristics, the treatment is also different, which is a lot of tiles need to be soaked, and some do not need to be soaked in water for a different period of time, these are all important to understand, and also to understand the tile models, grades, sizes and color code, etc.

Laying tiles, the first thing you need to do is to deal with the ground, the ground level should be good. Tiles are generally used cement with other things to do bonding, so the production of cement to have a sticky feeling before, cement, you can use 325 model, the effect is not bad.

Before laying also need to be pre-paved, that is, first of all, the tiles are first arranged on the ground to see how the rendering is, to see how many tiles are needed, to see if there is no need to cut the place and so on.

When laying need to leave some small gap between the two tiles, this gap is for us to make adjustments with, this gap will be decorated with seamstress later.

Laying tiles must choose those more experienced workers, they are almost every day in the laying of tiles, can be said to be a master, they are very knowledgeable about cement and other materials, looking for them to consult with the cheaper and better quality, can save a lot of money, but also to ensure that the tiles are laid.