Pull-out faucet is good An article to take you a comprehensive understanding of the pull-out faucet

The use of faucets in the home is quite frequent, especially in the kitchen side, so the quality of the faucet is quite important, do not choose poor quality faucets to save money. What faucet in the kitchen? Undoubtedly is the pull-out faucet, for this type of faucet we have to know how much? In the end, pull-out faucet is good? The following article takes you to a comprehensive understanding of pull-out faucets.

What is a pull-out faucet

At present, the pull-out faucet on the market is becoming more and more popular, it has a column of water and jet water in two ways, the button on the top of the shower can be easily converted, and its pull-out 1.5 meters long stainless steel hose, to reach the user needs any place.

Pull-out faucet is good

Plumbing faucet concealed pipe detection, installation and maintenance of free hotline:: 400-017-1110

Advantages:

Convenience: As we all know, the traditional faucet spout is fixed, usually with the size of the object to receive water is very inconvenient, such as pots, buckets, etc., but the pull-out faucet is very convenient, but the pull-out faucet is very easy to use. The pull-out faucet properly solves this problem.

Humanization: The pull-out faucet can be pulled out from the nozzle position of the stainless steel hose with a length of 1.5 meters, and the swivel angle can be up to 360 degrees, and the nozzle can easily reach the place where you need to flush or use water. Whether you want to stir-fry and add water, watering flowers, or washing dishes, the water flow can easily reach, really where you want to wash where you want to wash, gently press, you can flexibly change the shower water and faucet water, easy to solve any problem in the kitchen cleaning.

Easy to clean: Due to the Chinese cooking habits, the kitchen fumes are large, so the faucet is easy to stained with oil and water, and after repeated cleaning, the surface of the faucet is easy to lose luster. But the pull-out faucet will not have such a problem, the use of special plating technology, cleaning agent scrubbing without fading, no corrosion, not easy to stick oil, easy to clean, wear-resistant.

Durability: Professionals say that the durability of the faucet mainly depends on the surface treatment process, in the PH value close to 3 acidic high-temperature environment test, more than 4 hours intact, indicating that the surface treatment process is very hard, and the pull-out faucet to achieve this standard.

Environmental friendliness: The environmental friendliness of the faucet is manifested in the lead content in the water, which is mainly caused by the water body flushing waterways. The use of low-temperature welding process between the purple copper water inlet pipe and the faucet body under the table, to maintain the high strength of the product, and the use of special welding materials, never contain cadmium, effectively eliminating harmful metals.

Disadvantages: First, the pull-out faucet will not be easy to rotate. In fact, pull-out faucet is not picked up when, no matter how to swing is also the bottom of the rotation, because the pull-out junction is curved fittings inserted solid, can only be picked up, can not be rotated.

Second, pull-out faucet often pull, stainless steel hose will not knot or harden, or even damaged, the spout is not easy to put in place? Pull-out faucet in the production, in the hose on the design of a heavy fall, when not in use when put directly, the hose naturally reset, hose if not intentionally bending will not have no problem, outside the stainless steel quality is good, inside the hose is naturally not easy to damage.

Pull-out faucet installation

1, the installation of tools to prepare the first ready to install tools, before installation, check whether the supporting parts are complete, common faucet spare parts are: hoses, rubber washers, sprinklers, go to the water, crutches, decorative caps and so on.

2, clean before installation, before installing the faucet needs to be released before rushing, wash the water pipes in the sediment impurities, remove debris in the installation holes, and check the accessories in the box does not interfere with impurities, so as to avoid clogging or wear and tear of ceramic valve spool.

3, left hot water, right cold water take over, remember the left is hot water, the right is cold water, the two pipes are 100mm-200mm apart. water inlet connector position is fixed and then uninstall the faucet, to be completed after the wall masonry, and then install the faucet, so as not to faucet surface plating is abraded, scratched.

4, single-hole basin faucet installation installation, be sure to select the special angle valve, and the angle valve must be fixed with the wall out of the hot and cold water pipes. When you find the distance between the angle valve and faucet water pipe, go to buy special extension tube to connect. Here Jiuzheng building materials network reminds, must not use other water pipe to connect, because if the water pressure is large, it is easy to fall off, leakage, and cause damage to you. If the inlet pipe is too long than the outlet pipe, you can cut off part of it according to the need, and the angle is not suitable, then you can bend it moderately to the desired position according to the need.

5, shower, bathtub faucet installation after the purchase of concealed faucet, the faucet spool is generally pre-buried in the wall, pre-buried before you must pay attention to the thickness of the bathroom wall, the wall is too thin, then, the spool will not be pre-buried. Pre-embedded spool of the plastic protective cover do not easily remove, so as not to pre-embedded cement and other chores damage to the spool. Also should pay attention to the spool up and down, left and right direction of the spool, so as not to bury the wrong spool. Wall-mounted faucet pre-buried into the pipe size deviation, can be used to adjust the available crutch for school position.

Pull-out faucet brand which is good

1, Maile / Maile pull-out faucet

Maile brand on the Internet opened an official flagship store Maile Sanitary Ware Official Flagship Store, so that the majority of Internet users can also buy online and Maile entity stores with the same model of goods. Since its inception, the McLeod brand has been well received by the majority of users, although McLeod has achieved some good results, but did not slow down the pace of progress, is still working hard to become a brand in the industry.

2, Philip Rain pull-out faucet

Ruian City, Lanhai Sanitary Ware Co., Ltd. focus on the development of high-quality plumbing products, Philip Rain to the product, quality service to help dealers grasp the first opportunity to win the competition, and perseverance and dealers to establish a long-term cooperative partnership, our success is built on the basis of the success of dealers. The company has a design team, the use of advanced production technology and management mode, specializing in the production of hotels, restaurants and residential installation for the use of bathroom hardware accessories and other related products. Due to the novelty of product modeling, well-made, reliable quality, popular with consumers.

3, Yviii pull-out faucet

Yviii brand responsible for Yviii flagship store, since the creation of the Yviii brand, has been striving to treat the user with high-quality products and better service, at present, Yviii in the operation of the main products are: mushroom water, toilet brush, leakage cover, toilet brush holder, panning basin, toilet paper holder, p-type tube, copper spools, floor drain cores, anti-odor floor drain, Bath towel ring, color basin, row of clothes hooks, sensor faucet, sense

Plumbing faucet concealed pipe detection, installation and repair of free hot 400-017-1110