Monitoring system installation tutorial

Tools only need the conventional: cones, pliers, soldering iron, electric drill;

Price: if it is all the way: just the camera 300-400 yuan; infrared camera 400-600 yuan (15 meters or so) you have not been able to mark out the monitoring distance, so the price can not be determined;

Save the video of 1 day, you can use the compression card (requires a computer) country with embedded hard disk VCR (1600 yuan)

The following is the installation method of the camera, detailed information can be found in China's home security monitoring network, where there are many home monitoring introduction;

Camera installation method:

Step 1

Take out the bracket, ready to tools and parts: up the plugs, screws, screwdrivers, a hammer, drills, and other necessary tools; according to the previously Determine the location of the installation, check the size and type of the rising plug and self-tapping screws, try the bracket screws and camera base screws are appropriate, the pre-buried pipeline interface is dealt with, test whether the cable is smooth, ready to enter the installation process.

The second step

Take out the camera, in accordance with the pre-determined model and specifications of the camera lens, carefully load the lens (infrared one-piece camera does not need to install the lens), pay attention to do not touch the lens and the CCD (marked part of the figure), to confirm that the fixed firmly, connect the power supply, connected to the host or the scene using a monitor, small TV sets, etc. to adjust the aperture focal length.

The third step

Take out the bracket, up plugs, screws, screwdriver, hammer, drill and other tools, in accordance with the location of the pre-determined, mounted bracket. After checking the firmness, install the camera in the agreed direction;

Step 4

If you need to install the shroud, after the second step, start installing the shroud directly from here.1. Open the upper cover plate of the shroud and the back plate; 2. Pull out the fixed metal piece and fix the camera; 3. Install the power adapter into the shroud; 4. Reset the upper cover plate and the back plate, straighten out the cables, and fix them well. , mounted to the bracket.

Step 5

Insert the welded video cable BNC plug into the socket of the video cable and make sure it is fixed firmly.

Step 6

Insert the power output plug of the power adapter into the power socket of the surveillance camera and confirm the firmness.

Step 7

Plug the other end of the cable into the control host or monitor (TV) and make sure it is firmly fixed.

Step 8

Turn on the power of the control main unit and the camera, and adjust the camera angle to the predefined range through the monitor