What should I do if the anti-theft door lock magnet is tight

The door suction is too tight. Find an unused sock, cut off a part and leave the fingertip. The length of the fingertip should be able to be tied behind the ball and wrapped around the door suction ball. If the suction is still tight, wrap it in a thin layer.

1. Check with the owner first whether the door suction is installed on the ground or on the wall. Because this is a bathroom, the owner decided to install a door suction directly on the floor tile, leaving room behind the door.

2. Step 2: Open the door to the required maximum position and test whether the door suction function is reasonable and whether the distance between the door suction and the door is suitable for positioning the door. After roughly positioning, open the door to test whether the actual operation is reasonable, including whether the door suction is in or out.

3. Fix the door suction on the ground and tighten the screw with a small inner corner. This is a delicate work with no experience. After going through the procedures of confirming the position, punching and assembling, the next work is to install the fixed end on the ground, tighten the screw of the fixed end with the attached internal corner tool, and the door suction will be automatically installed.