Traditional Culture Encyclopedia - Traditional festivals - How to wrap the handle of the anti-bending slingshot?

How to wrap the handle of the anti-bending slingshot?

1. How does the Liulang reflex slingshot wrap around the sweat absorption belt?

Step 1: Press the thin end (starting end) of the sweat-absorbing belt on the bottom cover side of the handle.

Generally, a double-sided adhesive tape will be attached to the beginning of the sweat absorption belt. Fix the end of the sweat absorption belt on the end of the handle.

Step 2: Hold the handle with your fingers in your left hand and rotate it clockwise (just keep the LOGO positive). At the same time, control the direction of the sweat absorption belt with your right hand to make it aligned. The edges of the sweat absorption belt can overlap each other, and the amount of overlap depends on personal preference, generally 2 mm

In the process of winding, the sweat-absorbing belt should be properly tightened, otherwise it may spread out during hitting the ball. Thirdly, winding the adsorption belt to the end according to the above method. At this point, the excess absorption band is cut off, and the upper edge of the absorption band can be trimmed if necessary.

The fourth step is to prepare the pasted tape (that is, the small tape I just said not to throw) and wrap the end of the sweat-absorbing tape with tape until it does not spread. Note: 1, the sweat absorption band has the best viscochirality and sweat absorption at first, and it will become more and more slippery with the increase of use time.

2. Finally, I would like to remind you that from a health point of view, bacteria will increase with the increase of use time. In order to ensure the feel and hygiene of hitting the ball, please change the sweat absorption belt regularly.

The suggestion is to play the ball five times and change it at least once.

2. How to make a cold bending slingshot into a reverse curve?

The cold-bending slingshot is made into the following reverse curve: the thumb tops the arch eye, and the convex part of the reverse curve faces the palm of the tiger's mouth.

The index finger is hooked on the arch belly, and the little finger is buckled in the bottom handle ring. Slingshot is a cold weapon or a game tool.

Slingshot is generally made of branches in the shape of a "ya", with epithelial tendons at both ends of the upper end and skin blocks wrapped around the body in the middle. Strength depends on the tension of the rubber band. The greater the tension of the rubber band, the greater the power of the slingshot.

A long-range weapon that fires projectiles with a bow. In ancient times, projectiles were mostly used for hunting.

In ancient poetry, there is a description of "breaking bamboo and bamboo and flying soil to eat meat" It means cutting bamboo to make bows and shooting birds and animals with clay balls.

Later, it developed into a martial arts instrument. There are many ways to launch a projectile, such as "Su Qin carries a sword" and "Zhang Fei shoots a horse".

Zhang Xian, a Shen Lu legend who sent his son to China, is an expert in using slingshots. Leonardo da Vinci in Europe also suggested launching smelly bombs with slingshots.

Because it is a dangerous weapon, please don't shoot people indiscriminately.

3. What's the difference between a straight slingshot and a rebound bow?

The difference between a straight slingshot and a rebound bow is as follows:

1, the powers of the two are different.

The bending strength is great. Similarly, the length of the rubber band can be lengthened by about 10mm, and the length of the straight handle is limited.

2, the two feel different.

The curved handle is good, recurve bow is more ergonomic, and the straight handle is heavy and inflexible.

3. Their positioning is different.

The anti-curved star is well positioned. When recurve bow pulls the full bow, the arch eye of the straight bow leans backward, which is beneficial to the positioning of the rubber band.

Extended data:

Slingshot selection:

1, safe

Due to the continuous improvement of the performance of rubber bands, the ejection force of modern slingshots is not what it used to be. Small bows of more than ten or twenty yuan are common in the market, and professional slingshot rubber bands are not used.

This kind of bow is usually made of zinc alloy, which has low tensile strength and high brittleness. If the casting process is defective, or the bow arm may break and rebound at the moment of opening the bow, it may hurt the user's face. In recent years, such tragedies have occurred from time to time, which requires the attention of the majority of bow friends.

Step 2 be practical

If a bow can't be put into use comfortably, it's a waste. This is the practicality of the bow. Under the premise of safety and security, the material or production process of slingshot is not important, but it is enough to use it easily, hit it accurately and accept the price.

There is a more important question, whether the bow eye grinds the rubber band, regardless of tradition or sticking the ball. If the bow eye is not properly polished and the rubber band is eaten, it will break from the bow eye after dozens of rounds, which is equivalent to waste.

Step 3 be artistic

A perfect bow is not only safe and practical, but also beautiful and fashionable in appearance. Everyone has the so-called love of beauty; A good bow is like a beautiful woman. A bow looks comfortable and is comfortable to use, which is undoubtedly the best one to use.