How to fasten the crystal elastic rope?

Question 1: How to tie a knot by threading beads with crystal thread? The knot I tied always comes loose ... After the beads are put on, tie the ropes (***4) on both sides in a dead knot, tighten them and cut them off. If possible, you should pull the thread into the hole of the bead so that it won't open. Remember, don't tie two wires together, just tie a fast knot.

Question 2: How can the elastic thread rubber band woven by beaded crystal bracelet be more firm at the end? The third step is to tie a knot here, tie it tightly, and then tie a ligation.

Question 3: How to tie the crystal elastic thread? Aren't there two ropes on the other side of the opening? Use one to cross the side without opening, tie the knot with the other, tie the knot three times, cut it open with scissors, and close the beads next to it!

Question 4: How to tie the crystal elastic thread is a normal tying method, because it is easy to slide down, so it should be tied tightly.

Question 5: How to tie the elastic rope of the crystal bracelet has a certain life. It is directly related to the time you wear it and the number of times you take it off. Although you cherish it, it is inevitable to replace the elastic band at least once a year. The following method is easy to learn and has detailed illustrations. Please read it carefully. (1) preparation: elastic rope, string bracelet special needle (generally distributed with the bracelet, if not, you can also use fishing line or (2) Fold the elastic thread in half as shown in the following figure (depending on the pore size of the beads, it is not necessary to fold the elastic thread in half if the pore size is small), "String a special needle on the elastic thread; (3) String them in sequence according to the pre-arranged order (note: the aperture of the first bead is slightly larger, which is convenient for pulling in the thread end at the end of the work). ④ After all the threads are connected, remove the needle and pull the two threads at the tail into the circle at the head, as shown in the figure below. ⑤ Move the beads to the head, two beads slowly. If it is uneven, you can operate it several times: ⑤ Repeat threading twice like tying a shoelace (pay attention to tighten the knotting front slightly, otherwise it will be loose). ⑤ Cut off the redundant thread ends and keep the thread ends 0.5 cm. ⑧ Pull the thread end into the hole of the first bead in your thread, and arrange the distance between the beads to make it even and beautiful.

Question 6: Q: How to tie the elastic rope of the bracelet? You can tie a Chinese knot, or you can tie a double button like a shoelace, or you can string small beads like crystals and tie a fast knot. Personally, I prefer to tie my shoes.

Question 7: How to tie the elastic thread of the bracelet? You can apply a little glue to the line, pull it into the beads, and it will stick to the beads. The harm is that I want to wear a bracelet again in the future, and the thread inside this bead may not come out. Elastic thread, not hot It will melt quickly, unlike knotted thread, which can have a sintered head. In addition, if you don't use glue, you can re-thread, thread the beads with four strands of elastic thread, and when tying the elastic thread, hit it twice more to make the knot bigger, and then pull the beads in.

Question 8: The elastic thread of beads, the round transparent crystal thread, the elastic thread bracelet of bead rope, elastic rope, how to tie the knot, and browse the video of Chinese knot, in which auspicious knot is very simple and easy to learn.

Question 9: How to play the elastic thread of a string of garnets at last? To draw, just tie two knots ... just tie a knot. After the thread is tightened, it is difficult to plug it into the hole of the bead. Pick a big hole and put it outside.