How to install door sets and how they should be maintained

The door casing is also known as the frame of the door. Its function is to hold the door and protect the door from scratches or damage. So, how to install the door cover? How to maintain the door cover? The following is a detailed introduction to the how to install the door set and the door set maintenance knowledge of the content.

First, how to install the door set?

1, the basic framework. Choose solid wood as the core material, according to the original size of the door cover to cut the same width of wood, making the basic frame of the door frame. How to install the door cover, first determine the position, you can use infrared level on the wall to mark the horizontal line, and then measure the size of the door opening, both sides use this ink bucket to reproduce the vertical line.

2, punch holes in the wall. How to install door sets, use pneumatic drilling to open the wall and add a wooden wedge. Remember to mark it at this point. At this point, the door cover must be installed vertically and horizontally in all directions to ensure that the right angle of the frame is straight, and then put nails through the door frame, nail wooden wedges, and the door frame is fixed on the wall. How to install the door cover and how the door cover should be maintained

3, do the stacking level. After fixing the basic frame of the door cover, you can do stacking. The purpose is to make it easier to close the door in the future. The distance is about 4-5 centimeters.

4, paste the panel. How to install door sets, after installing the above steps, you have to paste the panel. First check whether the panel of the same door has similar color difference and burrs on the edge. Then measure the size and cut the panel.

5, install lines. After connecting the panels, you can start installing the lines. How to install door cover, keep 1 cm distance from inside to outside, mark and cut wood lines according to brand installation. This will make the overall coverage of the door more beautiful. At this point, we must pay attention to the space between the door frame and the floor to ensure that the rest of the process is carried out properly.

6, door stop line. Use a nail gun to nail the top line of the door to the line of the door cover, then fix the entrance line and mute bar. How to fit a door cover, simply press the seam line of the front and back door frames. You should be careful not to nail them all at once, as door frames can twist and excess cork cuts.

7. Cleaning. After installing the door, finally clean the surface of the wooden door cover.

Two, how should the door cover be maintained?

1, before the door cover is ready to install, it is best to use a softer material to cushion it during transportation to avoid better protection of the surface from scratches.

2, when cleaning and repairing, it is recommended to use a soft cotton cloth to clean. Because it is easier to wipe the surface with a hard cloth. If the surface of the door cover is too heavy, it can be used in combination with neutral detergent, toothpaste or furniture cleaner to clean the stains quickly.

3, under normal circumstances, we should not apply too much force to open or close the door, and the opening angle should not be too large. This is also the maintenance of the door cover, prolonging the service life of the door.

Tuba Rabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", as well as decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~