I would like to ask professionals about the specific painting steps of mahogany furniture.

First of all, it must be painted. Mahogany is a very expensive wood. It is best to use large paint, or nitrocellulose transparent paint, or unsaturated polyester transparent paint. The ancient craft should be brushed 6-7 times:

1. Grind it with fine sandpaper until it feels smooth and flat, and then blow the dust clean.

2. Brush transparent putty, fill holes and press burrs.

3. After drying, polish it with fine sandpaper until it is smooth. Be careful not to penetrate the sand, that is, not to penetrate the putty.

4. Apply transparent base oil.

5. After the bottom oil is dry, sand it with sandpaper and blow off the dust.

6, the above oil, after hard work.

Precautions:

1. The proportion of paint, curing agent and diluent should be adjusted according to the local temperature and humidity at that time.

2, corners, to be polished into rounded corners, you can paste paint.

Steps 3, 4-6 should be done 1-3 times according to the actual effect.

In addition, you should know whether your wood has been dried (without losing ordinary air drying). If not dried, the furniture 10 will crack 8-9 times.

What we are talking about here is the closed coating method, and the open coating method is more difficult to operate.

No matter which process requires the operator to have a high technical level, it is recommended to find someone with experience in solid wood finishing, otherwise good wood will be wasted. .