How wide and long is a dormitory frame bed in general?

Specifications 200*92*170CM. the lower bunk is 45CM high, the distance between the upper and lower bunks is 100cm, and the distance between the upper bunk and the ground is 1450mm.

The general specifications of the steel tube bunk bed are, structurally, made up of a bed frame, bed beams, bed bars, bed boards, guard rails, and bed ladders. The wall thickness of the steel pipe used for the bed frame is 0.6㎜, 0.7㎜, 0.8㎜, 1.0㎜, 1.2㎜, 1.5㎜; and the specifications are round pipe (Φ38mm, Φ50㎜), square pipe (40×40mm) and flat pipe (25×50㎜).

The assembly form of bunk is divided into two types: assembly type and plug-in type.

Bunk bed board: there are multi-layer board and pine board.

Extended information

Buying knowledge

1, safe to buy: each diffraction can be tightly tightened, bolts or other guardrail close to the bed, bed frame and guardrail spacing at the bottom is not more than 89 mm. Corner guardrail, extend at least 127 millimeters above the surface of the mattress to prevent rolling children. You should also buy both sides of the guardrail, just in case.

2, material selection: bunk beds are recommended to buy pine bunk beds, cost-effective, environmental protection factor is relatively high.

3, color shopping: the color is too bright bunk beds for a long time will affect mental health, we must choose the elegant and stable color. Do not store cabinets under the bed, storage cabinets are equal to a huge source of pollution.

4, the bed base to buy: the so-called "foundation is not firm, the ground is shaking", so in the purchase of the right bunk beds, the first thing to pay attention to is the quality of the bed base, purchase with the movement of the shake a few times, try the effect.

Baidu Encyclopedia - Bunk Beds