How to wrap a book cover

The materials needed to wrap the book cover: book cover paper, scissors.

The first step: spread out the book cover paper, the book to be wrapped placed in one-half of the book cover paper to the right a little bit of the position, the specific distance depends on the thickness of the book.

Step 2: Fold the paper in half and place the book in a position where the right side of the paper is overlapping, then the book is placed in the right position.

Step 3: Press firmly along all sides of the book.

Step 4: Once one side is pressed, turn it over to the other side and use the same technique to press out the edges.

The fifth step: the pressure of the edge of the line of the book cover paper presented with the edge of the book wrapped as shown in the figure:

The sixth step: the book cover paper and the book's outer distance length and width of 3 centimeters and 5 centimeters is appropriate, too wide waste of paper, too narrow is not easy to operate and package is not too solid.

Seventh step: the bottom of the book cover paper at the center line of the right side of the cut out the diagonal line as shown in the figure.

Step 8: Cut a diagonal line on the left side as well.

Step 9: Repeat steps 7 and 8 on the opposite top to cut a diagonal line.

Step 10: Cut the four corners.

Step 11: Place the book in the book cover paper and fold inward along the horizontal lines of each edge.

Step 12: Fold the vertical lines inward as well.

Step 13: Do the same for the other back cover of the book.

Step 14: The book on the package in order to facilitate identification, we can label the bag, the package is complete.