Introduction of installation method of Yuba in pvc ceiling installation

Nowadays, many people will use pvc as the ceiling, and PVC ceiling is a popular environmental protection ceiling. Generally, PVC ceilings are made up of different plates, which is very convenient to assemble, but some people have doubts. How to install Yuba in PVC ceiling? Do you know what a Yuba is? Yuba is a light source that can generate heat, which is usually installed in the bathroom. Many northerners will install yuba in the toilet, so that it will be warmer when taking a bath. Next, let's take a look at how to install Yuba in PVC ceiling with Bian Xiao.

Integrated ceiling installation process:

1. Determine the location: determine the specific location of electrical appliances and keels according to the design drawings and site conditions. To determine the installation height of the ceiling, Yuba can generally achieve the maximum effect between 2.1m-2.3m. ..

2. Ensure levelness: After the height is clear, horizontally install the corner line. Fix the corner lines with screws or glue (to prevent the tiles from being damaged), and the corners shall be collaged neatly without obvious gaps.

3. Punching positioning: After the keel position is determined, punch holes with an impact drill. Cut and assemble the boom screws according to the specific length. The suspender screw is fixed in the drilling hole. This step can be carried out simultaneously with the previous step.

4. Installation of keel: Install the main keel on the fixing ring under the suspender screw, and fix the triangular keel on the main keel. Adjust properly after installation, and gradually tighten the screws at the joint to ensure straightness.

5. Ceiling: Square aluminum gusset ceiling has two installation methods: edge installation and middle installation, depending on the specific situation. It is very important to install the first board, which determines the position and level of the other boards.

6. Assemble electrical appliances: Assemble electrical appliances as required, and the fixing frame shall be firmly installed. It is best to purchase gusset plates and electrical appliances for integrated ceiling to meet the requirements of size and load-bearing and avoid accidents.

7. Electrical installation: The installation personnel should hold professional electrician qualification certificate, and the exposed wires should be protected. Connect electrical appliances and keys, and conduct power-on test. After installation, adjust it with a leather hammer, leaving no gaps.

8. Adjust the top cover: it is difficult to install the gusset plate at the corner. When installing the last gusset plate, it is best to remove a complete gusset plate installed next to it. Install after the environment is adjusted to the best condition.

The method of installing Yuba on the PVC ceiling is also very simple. When installing the suspended ceiling, there are usually design drawings and actual situation on site. We can compare the two, and then adjust the design according to the installation location of Yuba. When we install Yuba, we should determine the horizontal line and height. After determining the horizontal line and height, you can start installing Yuba. When installing Yuba, you need to remove the ceiling somewhere. Pay attention to safety protection during installation.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~