How to change the watchband

The method of changing the strap is as follows:

Tool/material: small awl.

1. First of all, you need to prepare a small awl, an auxiliary tool for removing the strap.

2. Then turn the watch upside down, fix the dial by hand, and insert the awl into the joint at the top of the strap.

3. Hold the raised part of the strap replacement position, so that the strap can be quickly replaced and then disassembled in the other direction of the strap in the same way.

4. Then put on a new strap, aim the strap hole at the strap installation place, and gently pry it open with a small awl, as well as the other side.

Precautions for changing watchband

1. Before replacing a new strap, make sure that the dimensions match. The watchbands of many watches of the same brand are not necessarily the same size. Be sure to carefully measure the width of punctuation marks with a ruler, or buy the watchbands of the same model directly, which is safer.

2. Be careful in the process of changing the strap, and do a good job in protecting the watch, so as not to rub your ears or nails against the watch, which is not worth the candle.

3. If there are any problems in the replacement process, immediately stop the hand movements, confirm whether all parts are missing, and send them to a professional watch repairer for inspection.

4. After replacing the strap, carefully check whether the strap and the watch have been clamped and not loosened, and confirm that all parts have been installed in place.