How to disassemble and assemble Wuling Hong Guang gearbox

The disassembly steps of Wuling Hong Guang transmission are as follows:

1. First, remove the universal joint screw to separate the transmission universal joint from the transmission shaft; Then remove the clutch cover screw to separate the transmission from the clutch; If it is a remote control gearbox, separate the control mechanism from the gearbox body, and finally remove the gearbox from the vehicle;

2. Clean up the sludge and dirt outside the transmission, and pay attention to protecting the front and rear axle;

3. Unscrew the oil plug, drain the lubricating oil in the transmission, and then adjust the oil plug;

4. Find a clean and dust-free place and start to disassemble the transmission with a disassembly tool and a copper bar. The disassembly sequence is generally: transmission cover, first shaft, second shaft, intermediate shaft and reverse shaft;

5. When disassembling the parts, observe the original direction and position of the parts before disassembly, and make records when necessary; Dismantled parts should be neatly arranged in different parts according to the disassembly sequence, and the parts can be connected in turn by iron wire or iron wire when necessary; The gear can be sleeved on the shaft according to the original direction and position, so as to prevent wrong assembly or missing assembly;

6. All removed parts should be cleaned and inspected accordingly, and those that can no longer be used should be replaced; The removed oil seal and gasket can no longer be used and should be replaced.