Traditional Culture Encyclopedia - Traditional festivals - Table tennis backspin play
Table tennis backspin play
Table tennis backspin play 1 table tennis backspin play
In the game, if the opponent serves a spin ball, as a long rubber player, you can take the ball back in the following ways.
1, friction:
Increase the friction ratio and connect it back with a similar "shovel" action. Features: high accuracy, high second arc, but fast dive, the opponent often thinks that the ball can play when it is out of bounds. And the forward rushing speed is fast after landing. Be careful when wiping the ball.
First, the other side steals the attack
B, the other side should attack the slightly higher ball, otherwise the ball will be higher when it is wiped back, but it will be shot to death by the other side.
C, if the body position is not suitable, return the ball as close as possible to the opponent's bottom line to reduce the quality of the opponent's attack.
2. Arch:
Some of them are like pushing down the glue and spinning, but when the ball arches, the racket face of the ball leans back slightly. In the rising period or high point period, the wrist will be stiff and the arm will exert force forward and downward after adjusting the racket. The return ball floats and sinks, which is difficult to use but has a high scoring rate.
3. hey:
By hitting the ball back, it is characterized by early hitting time, fast returning speed and low arc, so it is difficult for the opponent to return the ball with high quality after falling off the stage.
Nozzle spinning method
To catch the spinning ball, you can use methods such as steady rubbing, short swing, long chopping and pulling. For beginners, the most basic way to catch the spin ball is steady rubbing, which requires steady rubbing and low rubbing and can't get off the net. For table tennis players with a certain level, we must actively improve the quality of returning the ball and increase the difficulty of the opponent's returning the ball. If the opponent's serve rotates strongly, it is necessary to use the method of swinging short and cutting long to make it return, and at the same time, it is necessary to increase the difficulty of rotating and landing. Because backspin has the characteristics of low speed and great rotation change, the preparation time for catching the ball is sufficient, but it is difficult to control the rotation intensity and the returning hand.
A strong backspin is usually combined with a non-rotating serve of similar technique. This requires the receiver to judge accurately and see clearly the rotation intensity and landing point of the incoming ball before he dares to get started. If you don't have the guts, you will be attacked if you try to catch the ball steadily or even hold it. If you can't get the ball, it won't make a big change, and it is easy to be attacked by the other side, resulting in passivity or losing points. When using backhand pull technique to catch a backhand side spin long ball, it should be noted that if the opponent's serve speed is not too fast, the angle is not big, and the rotation is average, it is easier to catch it.
However, if the opponent's service quality is high, it is required that both sides feel strong when pulling the ball or punching, and friction rotation is used to restrain the opponent's rotation. Give way completely and grab the other two corners. If the incoming ball can be accurately judged, it is also very effective to take it back by rubbing and squeezing. If the opponent's serve is sharp downward rotation, it is easy to hit the high ball with normal rubbing method and easy to get off the net with pushing and dialing method. At this time, you can use rubbing and squeezing back, and you can also make the return ball produce a certain sharp backspin, but you should pay attention to mastering the hitting time, racket shape and force method.
First of all, no backspin short ball is introduced.
If it is judged that the opponent's service is a backspin short ball, there are several ways to receive the service according to the different incoming balls: one is in the backhand position, which can be shortened to the opponent's forehand triangle, or the middle is in the forehand position. You can also chop at the big angle of the opponent's forehand and rotate as much as possible to increase the difficulty of the opponent's board in space. A positive' catch' can be pulled with a backhand, and the opponent is generally passive. Second, in the forehand position, you can chop at the opponent's backhand angle or swing at the opponent's forehand angle briefly. Third, in the middle position, the backhand can be screwed up in the stage, which is a bit picky. The opponent's backhand position can be controlled by swinging the forehand to the backhand position if you find it difficult to pick the ball and spin.
Second, the entry and semi-entry of backspin long ball
If it is judged that the opponent's serve is a long backspin or a half serve, the method adopted is as follows:
First, it is better to spin the long ball backhand and pull it up directly with a horizontal racket. If you can't pull the ball, you can only control the angle by rubbing the ball to avoid being easily attacked by the other side. You can take the initiative to attack sideways without hitting the cross, and you can pull it up directly after hitting the cross.
Second, the forehand angle is large. It will cause difficulties for the opponent to pull the loop ball to the other side with a big forehand angle or backhand, and try to improve the speed of returning the ball.
Third, chasing the body in the middle, taking the initiative to counterattack sideways with the forehand, and pulling the loop ball to the opponent's backhand position is a stable connection, and the opponent should not use force.
You can also return the opponent's forehand at a large angle, but the angle must be large, otherwise the opponent will definitely return to the next board, and the threat of returning is great.
Fourth, when receiving the service, we should pay attention to the coordination of our steps. Don't stand still and receive the service, but move more. In order to improve the quality of returning the ball, we should try to use the loop ball to return the ball and increase the rotation of the ball as much as possible, especially in the case of low arc of the incoming ball, which can ensure the attendance rate, overcome the backspin ball and reduce the mistakes. The increase in rotation will undoubtedly make opponents afraid to make efforts easily, which will help us to continue to attack in the next game of receiving the service.
Table tennis backspin 2 1, forehand position left topspin technique.
(1) Preparation before hitting the ball (including stand preparation, pitching and racket)
Take the right-handed racket as an example. Generally, you stand in the left half of the table and grasp the ball with your left hand in front of your body. When shooting, the left hand throws the ball upward, the right arm rotates outward, the wrist is held straight, and the wrist is held horizontally for abduction, so that the direction of the racket face is slightly left, the racket is to the upper right, and the waist rotates slightly to the right. When hitting the ball, the right arm swings from the upper right to the lower left.
(2) When hitting the ball
When the ball falls from the high point to the vicinity of the net height, the forearm accelerates to swing to the lower left, the wrist is straight, the wrist is horizontally retracted, and the waist is matched with the left turn. When the middle of the ball is rubbed to the upper left, it is a left topspin, and when the middle of the ball is rubbed to the lower left, it is a left topspin.
Adjust the position of the first landing point of the ball according to the length of the service.
Forearms and wrists are the main service parts, and the waist is the auxiliary part. During exercise, the center of gravity of the body moves from the right foot to the left foot.
(3) After hitting the ball
The arm continues to swing to the left and returns quickly.
2. Preventive measures
(1) The method of the left backspin serve is basically the same as that of the left backspin serve, but the difference is that the racket has a different friction direction after touching the ball.
(2) When the upper left (lower) ball is held horizontally, it is best to loosen the three fingers of the grip to increase the flexibility of the wrist.
If the opponent is cutting the ball or the opponent's receiving skill is conservative and likes to rub the ball, you can use the topspin on the serving side first, which makes it easier for the opponent to seize the opportunity ball or directly return the ball out of bounds and take the initiative. However, if the other party's ability is high and the technology is advanced, such as using the pick-and-play technology, it should be used with caution to avoid direct attacks.
- Related articles
- What kind of person is Satan?
- What does online and offline sales mean?
- Fuzhou has what special snacks, where places to play.
- How to choose liberal arts subjects in senior high school
- Where is Chengdu Handheld Wholesale Market?
- Is nunchakus from China or Japanese?
- What are the means of brand promotion and operation?
- Why the Dysant down jacket purchased in Jingdong was shipped in Suzhou
- Questions about Ultraman's and human forms
- How should I choose a household kitchen knife?