What are the characteristics of wall materials? What kinds of wall materials are there?

Wall materials refer to the raw materials for making walls. Wall materials are different from wall materials. When decorating houses, wall materials can make the walls more beautiful. Common products are wallpaper or wall paint, while wall materials are used when stacking walls. A typical product is bricklaying or partition board. The new wall materials are more environmentally friendly and can reduce the environmental pollution caused by decoration materials. Shall we introduce the information about wall materials in detail today?

What are the characteristics of wall materials?

The main characteristics of new building energy-saving wall materials are saving resources, not endangering human health and being reusable. In terms of saving resources, new wall materials mainly use some natural resources, and new wall materials mainly emphasize the reuse of waste, which can not only reduce environmental pollution but also save the use of resources, killing two birds with one stone. The new wall material adopts non-toxic and pollution-free materials, which reduces the harm of previous building materials to human health. In terms of renewable utilization, when the new wall building materials reach the service life, they will not be treated as garbage as before, but will be recycled again through further processing and improvement. Further strengthening the research and discussion of new building energy-saving wall materials is a work that must be paid attention to, which is of great significance to the development of China's construction industry.

What kinds of wall materials are there?

Gypsum board: Gypsum board is a kind of board made of building gypsum as the main raw material, appropriate additives and fibers as the core material, and special cardboard as the protective surface. Gypsum board has the characteristics of light weight, sound insulation, heat insulation, strong processability and simple construction method. The moisture-proof gypsum board has high surface moisture-proof performance, and the surface water absorption is less than 160g/㎡. Moisture-proof gypsum boards are used for ceilings, partitions and decorative walls in high humidity rooms. This kind of wall material is a good choice when the house is wet on rainy days.

Gypsum block: a lightweight building gypsum product made of building gypsum as the main raw material, mixed with water, poured and dried. Fiber reinforced materials or lightweight aggregate can be added in production, and foaming agents can also be added. It has many advantages such as sound insulation, fire prevention and convenient construction. It is a new wall material with low carbon, environmental protection, health and meeting the requirements of the times.

Autoclaved lime-sand brick: Introduction of autoclaved lime-sand brick: Autoclaved aerated concrete slab is a new type of light, porous and green building material, with cement, lime and silica sand as the main raw materials, and then different quantities of anti-corrosion steel mesh are added according to structural requirements. After high temperature and high pressure steam curing, the porous crystal autoclaved aerated concrete slab is generated by reaction. Its density is less than that of ordinary cement materials, and it has excellent fire resistance, fire prevention, sound insulation and heat insulation.

So much for the wall materials. Nowadays, most of the wall materials used in families are relatively green, which has the effect of sound insulation and heat insulation. In this paper, we divide the content of wall materials into two parts. First of all, let's introduce the characteristics of wall materials. The most remarkable feature of new wall materials is to save resources and reduce pollution at the same time. Then we also mentioned the types of wall materials, which you can refer to when you buy wall materials.