How to formwork the top eaves of reinforced concrete hexagonal pavilion

1. First, do a good job of the column foot. The centers of the six columns are on a circle, the distance between the centers of the inclined columns is 3m long, the distance from the center of the column to the center of each column is 1.5m, and the distance between the centers of two adjacent columns is1.5m. Two steel bars with the size of 12MM should be placed at each column position, and the height of the steel bars from the ground is 3m.

2. Each column consists of two semicircles, and the combined nodes are welded with steel bars. A little steel bar can be reserved at the welding position to facilitate later correction and positioning, and it can be sawed off after the pavilion is completely completed.

3. Before pouring concrete mortar into the columns, locate two adjacent columns with matching steps, and then pour the mortar into the inner holes of the columns from the top of the columns. The above is how the eaves of the reinforced concrete hexagonal pavilion support the formwork.