How to make TV antenna in the simplest way?

Methods The self-made TV antenna is as follows:

1. First cut the insulating rubber of the prepared wire.

2. Then fold it at right angles.

3. Measure a line 12cm long with a scale and fold it at right angles.

4. The folding direction is different from the first time. See the side view below.

5. Fold another 24 cm long side.

6. Fold 24cm, and then fold the edge of 12cm. Fold according to the drawing.

7. Pay attention to the last output line.

8. Connect in pairs as shown in the figure.

9. Then stick it with insulating tape.

10, where the diamond intersects with the diamond, it should also be glued and fixed to prevent deformation.

1 1. Connect the wire and plug from the output.

12. Fix the antenna on a wooden stick or other objects that can support the antenna.

13. Plug the plug into the TV signal line and plug the signal line into the TV socket.