How to make your own storage basket?

Homemade storage basket tutorial is as follows:

1, cut off the box cover first, and the back can be used as the bottom plate; Then cut the two sides into slopes and measure the remaining height, which is convenient for marking when packaging; Wrapped the inside and outside with wrapping paper, and I neglected the bottom plate. Because it's really inconvenient to pack, I'm going to put a piece of cardboard on it, that is, the cover cut out in front, and I can put it in by slightly reducing the size.

2. Cut out three inner partitions with appropriate size from the remaining other cardboard (instead of finding a suitable cardboard, two layers of thick propaganda paper were used), among which two vertical boards can be cut out according to the slopes on both sides. This time I was lazy and didn't make this slope. Last time I cut the slope, the effect was better than this. Then I wrapped the wrapping paper, measured it and cut out two gaps. If the cardboard is thick, the gap should be wide.

Make the "lining" a part of the storage box. Prepare a piece of cloth different from the outer cover, do the operation method of the outer cover as above, measure the size, and sew the four side facades and the base part together. Spread the sewn interlining cloth in the carton, temporarily connect the four edges with the four edges of the outer cover cloth with bead needles, and adjust the position.

3. Clip the three cut partitions together, fix their positions and put them in the box.