How to install and commission new flour milling equipment

How to install and debug new flour milling equipment? Most of the machinery and equipment in the formal use of a series of debugging, to lay the foundation for the later. Then one of the newly purchased flour milling equipment, how to install and debug it?

1, first of all, turn on the power to see if there are any abnormalities, to ensure that the equipment can be used. Then check the steering mechanism, brake, interlocking mechanism, clutch, dashboard and other structures, pay attention to test whether they can run sensitively. If you find any abnormality, you should promptly unplug the power supply and carefully check and eliminate.

2, next, test the engine, the process should pay attention to the oil pressure gauge, oil temperature gauge and water temperature gauge is within the prescribed value, whether the performance is stable. And listen carefully to the sound of the engine running flour milling equipment, such as abnormalities should be promptly shut down and troubleshooting. General running time for cold grinding 6 hours, hot grinding according to the order of low-speed, medium-speed, high-speed, in order to control the 15 minutes, 10 minutes and 5 minutes.

3, the beginning of the test run in turn processing equipment separation, cutting, threshing, unloading grain and other work processes. After completion, check whether there are loose fasteners, axle tile, bearings have no signs of heat, belts, chains, whether there is loosening and wear and tear, while hot to drain the engine oil sump, gearbox, and clean all parts of the filter.