Traditional Culture Encyclopedia - Traditional festivals - Steps of carpentry ceiling
Steps of carpentry ceiling
A, carpentry ceiling steps
1, browse the drawings, fully understand the drawings modeling.
2, the wooden square planing, brush on fireproof coating.
3, pop up the ceiling level line on the wall, and according to the need to fix a few longitudinal keel on the top first.
4, make the keel frame, can be nailed on the ground first, shaped top using joinery board to make a model.
5, the application of boom to fix the wooden keel, and pay attention to the transfer of water Xiang and verticality.
6, reserved for the lamp base plate or lamp slot position.
7, by the electrician will be connected to the wire, and leave the head.
8, the cut gypsum board will be fixed with self-tapping nails.
9, use the level pipe to find the level point, use the inkwell to play the level line along the level point.
10, light steel keel: wood keel for side dragon, light slot position with wood keel or woodworking board production, there are wood production place shall brush fireproof coating, keel at least five 0 above, spacing three 0 centimeters is good, hanging bar spacing six 0 (8) 0 centimeters is good, gypsum board and the board should be artificially reserved five (8) mm gap between the gypsum board surface tapping screws sunk one (2) millimeters and do the embroidery treatment to achieve flat and solid, the shaped to achieve smooth lines, and the shaped to achieve smooth lines. Shaped to achieve smooth lines.
11, wood keel: keel at least three * four or more, spacing three 0 metres to good, hanging bar spacing six 0 (8) 0 metres to good, hanging bar is strictly prohibited direct use of wood wedge nailed to the top, brush fireproofing paint until invisible color of the wood keel until the keel, keel on the Montreal 1 layer of feet of eucalyptus core 9% board and then on the gypsum board, gypsum board and the board should be artificially reserved five (8) millimetres of space between the gypsum board surface self-tapping screws Sink one (2) millimeters and do anti-embroidery treatment, to be flat and firm, shaped to achieve smooth lines.
Two, carpentry ceiling notes
1, pay attention to the ceiling of the buckle plate (if you want to do the ceiling), the ceiling of the material is very important, the crooked material will be deformed over time. And when you buy the buckle plate, ask the price of the whole package, do not buckle plate, edges and corners to buy.
2, if convenient, the dining room can also be an exhaust fan, so that when you eat hot pot or do barbecue will not dirty the ceiling of the hall house.
3, whether the ceiling is level, when doing the ceiling should pay attention to. Workers will say it does not matter if it is not flat later will use putty to make up for the flat, do not listen to him, let him immediately redo, putty fill 50px will fall down.
4, pay attention to the "three defense", that is, waterproof, moisture and fire. So in the choice of materials, do not advocate the use of wood keel. At present, home improvement is commonly used in aluminum, which can basically overcome some of the defects of the PVC board, such as time is too long easy to discoloration, aging, and breakage, at the same time, the greasy substances on the sticking to be difficult to clean.
5, B, and "aluminum buckle plate" only a word difference "aluminum composite panel", in the practical effect is very different. Because in the process of installing aluminum composite panel, to use carpentry board to support the bottom, but this practice is very unwise, if not dealt with in the moisture above, the consequences will be unimaginable.
Above the introduction of this carpentry ceiling some construction steps you can always refer to, we just hope that these carpentry ceiling methods can help friends, our article also introduces the carpentry ceiling notes friends read more. We also have a lot of decorative information waiting for your attention to share.
- Previous article:Foreign exchange financing (avoiding risks and realizing wealth appreciation)
- Next article:Is the fishing rod harder or softer?
- Related articles
- Application of post-grouting technology of punching cast-in-place pile in high-rise building?
- What is plastic flooring? And the advantages and disadvantages of the introduction
- April 2009 1 1 day (March 16 of the lunar calendar) is the only national drum festival that has been circulated for many years in Wei Village, Fencheng Town, Xiangfen County, and it is also the only d
- How to inherit Chinese medicine culture?
- Pictures of English Scottish men wearing kilt Why
- What are the specific user attributes of today's headlines
- What are the top ten brands of the latest home improvement waterproof coatings?
- Write a prologue with the theme of saving opera?
- What are the famous Chinese tea, specifications
- Installation technology and matters needing attention of domestic gas wall-hung boiler