What should I do if my laptop runs out of memory?

1. What should I do if my laptop runs out of memory?

Hello:

According to your description:

1. The notebook is out of memory. I suggest you upgrade your memory.

2. Go to official website to find out whether the configuration of this game can meet the configuration requirements of the notebook, so as to run smoothly.

3. Designate the game as a discrete graphics card to run. The method is to right-click the blank desktop and select "Configure Exchangeable Graphics Card" to enter the graphics card control center, click Browse to select the program to open, and click High Performance in the box behind the program.

4. Optimize your system in an all-round way and shut down the processes that occupy a lot of system resources.

5. Try to upgrade the system memory. Turn down the game special effects or running mode appropriately.

6. Reinstall genuine or pure operating system (backup important files). And install the official Samsung driver.

7. If the genuine system is turned on, press F4 to enter the Samaung recovery solution system recovery software, and select Recovery-Full Recovery to restore the initial system. (Back up important files)

2. What should I do if my computer runs out of memory?

The first trick: close unnecessary programs.

Ctrl+Alt+Del or Ctrl+Shift+Esc, open the task manager and see if there is any unnecessary software in the background ... such as Thunder, word, photoshop and so on. The second measure: empty the clipboard contents.

Enter a letter anywhere and copy it. The third measure: set up virtual memory reasonably.

If Windows virtual memory is not set, it is easy to receive the message of "insufficient memory". Win7: Click Control Panel-System-Advanced System Settings.

In the System Properties dialog box, click Performance Tab Settings, and then click Advanced. In the "Virtual Memory" setting, select the "Automatically manage the page file size of all drives" option to set the amount of hard disk space available as virtual memory in the computer to the default value.

The fourth measure: increase the available disk space. 1. Empty the recycle bin.

2. Delete temporary files. Open my computer, right-click the disk where you want to free space, and then click Properties. On the General tab, click the Disk Cleanup button and select the check box in front of the unnecessary files you want to delete to clean them up.

3. Delete expired files or archive files from the disk. 4. Delete all the files that have never been used.

The fifth measure: reinstall the damaged program. If only one program is used, the system prompts that the memory is insufficient and other programs can run normally, then the possible reason is that the program file is destroyed, resulting in the problem of insufficient memory.

Try removing and reinstalling the program, and then run the program again. If the system no longer prompts that there is not enough memory, then the original program file is indeed damaged.

The sixth trick: use memory optimization software. Seventh measure: Restart the computer If you just quit the program without restarting the computer, the program may not be able to return the memory resources to the system.

Before running important programs, please restart your computer to completely release system resources. Eighth measure: reduce the programs that run automatically.

If there are too many programs that run automatically when you start Windows, even if you restart the computer, there is not enough memory to run other programs. At this time, it is necessary to get rid of some unnecessary system self-startup programs.

Click "Start → Run" to enter msconfig to open the "System Configuration" window. Click the "Start" tab and check all programs that don't need to be started automatically.

The computer is out of memory.

Can't you ...? Not enough memory .. or virtual memory ..? If the virtual memory is not enough .. Set it here ..: Right-click my computer-> Attribute-> Advanced-> Performance-> Settings-> Advanced-> Virtual memory->; Change the selected logical partition and size according to personal needs.

If the hard disk is large enough, it doesn't hurt to set more points. According to your memory, it can be set to1g. The virtual memory of 160G hard disk can be set to 1g-2g, and normal software and games can run.

As for which logical partition to choose, as long as your C drive is large enough (there is one above 30G) and set up the C drive, the same is true for other partitions, and there is almost no difference. If the memory is not enough, you should use the optimizer to clean up the garbage ... or buy a memory ... Now DDR2 seems to have a better memory ... I suggest you buy one-on-one hit 5 12... 1G ... I use it unsteadily ... Hehe, it may be a problem with my machine.

..。

4. What if the computer runs out of memory and the playback speed is slow?

Methods: The computer temperature was measured regularly by software. If the temperature is too high, the computer will run slowly. It may be that the internal fan is broken or something. Clean up the dust in the computer, close the desktop and open the chassis, and blow it with a hair dryer and cold air.

Cclean and temporary files generated by surfing the internet at ordinary times should be often used to kill malware. The computer configuration is poor, try to set the virtual memory larger. (xp) Right-click my computer, Properties, Advanced, Performance, Setting Location, Advanced, Change, and set it to 4000-8000 in the custom area.

Anti-virus software installation takes up less resources, and only one auxiliary anti-virus software is installed. Setting the ip as static as possible can reduce the startup time of the computer and the reflection time after entering the desktop.

Don't put too many files and icons on the computer desktop, which will slow down the computer's response. Try not to install software on drive C. Close some startup programs.

Start-Run-Enter msconfig—- OK-Click Start-Start in the system configuration utility window. Except Ctfmon and antivirus software, all general programs can be closed.

5. What should I do if my laptop is out of memory?

"Insufficient memory" is a common problem. Running DOS applications and Windows applications causes "insufficient memory" for different reasons.

If there is a failure of "insufficient memory" when running a DOS application, you can check and handle it like this: 1. Check whether the system provides support for extended memory, and ensure that the EMM386.EXE command is in CONFIG. The SYS file contains RAM parameters. For the setting of RAM parameters, please refer to the related articles in Computer News. 2. If the fault still exists, check whether the DOS kernel program is compatible with other running applications, and whether any program occupies a lot of conventional memory, and handle it accordingly. Example: When running WPS, the screen displays "Insufficient Memory" and the system cannot run.

Considering that some other programs were executed before running WPS, it may be that these programs did not completely exit from the memory, so the WPS editing software still can't get in after restarting running Jinshan Chinese character system. Using the Mem command of DOS 6.22 to check the memory, there is only about 200KB of space left, and the CHLIB file occupies 255KB of main memory, that is, the font is put in the regular memory. Jinshan system should be able to automatically use extended memory to store fonts. Check the system configuration. In the configuration. SYS, which is set to: device = c: DOShime. Sys dos = high level. That is to say, after the DOS kernel program is transferred to the extended memory, although the available main memory space is expanded, Chinese fonts cannot be loaded because the extended memory conflicts with Jinshan system. There are two solutions:? Remove the DOS=HIGH setting, exit the DOS kernel program from the extended memory, and it can run normally.

? Change "/DEVICE=C:DOSHIMEM。 Sys "to"/device = c: doshime. sys/int15 = 320 ",because Jinshan system uses the low-end of extended memory, if there are other programs in this area, fonts cannot be loaded normally. By using the parameters of INT 15, a part of traditional extended memory is reserved for the system (that is, extended memory that is not managed by XMS specification and is directly used by INT 15), which can be used by font and DOS kernels. After this setting, the available main memory space in Jinshan Chinese character system can reach 5 12KB, which is about 250KB more than that without setting. If there is a failure of "insufficient memory" when running Windows applications, you can use the following methods to check and handle it: 1. First, you should check the resource usage of Windows. If the resources take up more and the available resources are less, the problem of "insufficient memory" will appear when opening new files.

At this time, you can clean up the screen, reduce the number of Windows, close unused applications, including TSR memory resident programs, and minimize Windows applications to icons. What if the problem is just a problem when running a special application? Tong Tang? Bear? Where is the scabbard? It's a big deal. It's a big deal. Close? 2. If the problem is not solved, clear or save the contents of the clipboard, and use the desktop option of the control panel to set the wallpaper to none; 3. If the problem still exists, you can use the PIF editor to edit the PIF file to increase the memory requirement value defined in the PIF file: KB Required: In standard mode, select the block program switch, and when the switch option is turned on, exit the application and return to Windows；; In the case of 386 enhanced mode, set the display usage to full screen, set the execution to exclusive, and set the video memory to the lowest possible mode; 4. If the problem still exists, restart to enter the WINdows system, and make sure that no other unrelated applications in the "Start" icon start running at the same time, and there are no unrelated applications loaded by the run or load command in Win. INI file. Example: A microcomputer, the hardware configuration is: Ali motherboard with PCI bus, 486DX- 100CPU, 540MB hard disk, 16MB memory, S3 64V+ graphics card, 2MB memory and Sanyo quadruple speed optical drive.

When entering Windows3.2 and starting WORD 6.0, the system prompts: "There is not enough memory to start WORD 6.0". In fact, the resources used by any application running under Windows must be contained in the memory area (also called resource heap) where various resources are stored, otherwise it cannot run.

But as a resource heap, the memory area is not large, only 64KB. And the number is quite limited.

In Windows 3.0, there is only one GDI resource heap (for storing graphical operating programs) and one user resource heap (for storing user interface operating programs), which is improved in Windows 3. 1, allowing one GDI resource heap and three user resource heaps. No matter how much physical memory the microcomputer is configured, the resource heap of window 3. X can only use four 64KB memory blocks.

Therefore, the so-called "insufficient memory" problem cannot be solved by increasing the memory capacity. After the problem of "insufficient memory" appears, it can generally be handled in the following ways.

First quit those applications that don't need to be run, and then check the available resources of the system. If the available resources exceed 30%, you can generally run new programs.

When multiple applications are running in the system, you can quit one of them and check the available resources once. If the percentage of available resources does not change before and after the application exits, it means that the application has not released the resources it occupies. If you want to restore these unreleased resources, you can only quit Windows and then re-enter Windows.

In order to ensure that the available resources of the system are sufficient when entering WINdows, there can be no irrelevant application software in the "Start" icon to start running at the same time, and there can be no irrelevant application loaded by the run or load command in Win. INI file, because these unrelated applications started at the same time may have occupied a lot of resources, making the application to be used unable to run. Generally speaking, after such processing, there will be no problem of "insufficient memory".

6. The newly bought notebook always shows what the lack of memory is.

Newly bought notebooks always show insufficient memory because some programs occupy too much memory, so just end the process.

Tools to be prepared: laptops. 1. press the keyboard shortcut ctrl+alt+delete to enter the task manager.

2. Click "Performance" above to view the current memory usage. 3. Switch to the "Processes" tab of the Task Manager, and then click "Memory" to let the system sort by the memory occupied.

4. My process management shows that the application "Firefox" takes up a lot of memory. 5. Go back to "Performance" in Task Manager to check the available memory, and you will find that the system has more available memory than before.

7. What is the problem of insufficient computer memory?

The solution of insufficient computer memory and slow operation;

1. Upgrade the memory module. That is, replace the original low memory with high memory (provided that the high memory is compatible with the motherboard).

2. Expand the memory stick. Generally, computers have two or three memory sticks, so you can buy new memory sticks for expansion (provided that the newly purchased memory sticks are compatible with the motherboard).

3. Try to set the virtual memory as large as possible. Take windows xp as an example, right-click My Computer → Properties → Advanced → Performance → Settings → Advanced → Change, and set it to 4000-8000 in the customization area; Take win7 as an example, right-click my computer-properties-advanced system settings-performance settings-advanced tab-virtual memory-change-select the C drive to be set, select the system management size or select the custom size as needed-Settings-OK.