How to lay the mosaic of stone floor? Technical standard of stone floor mosaic

When we are decorating, the ground is also an important part of the decoration, and the quality of the ground decoration will affect our future living quality. Now we decorate the ground, with wooden floors, marble tiles and so on. And stone floor mosaic is also loved and recognized by people. Stone floor parquet is a decorative stone floor, but many friends don't know how to lay it. Let's take a look with Bian Xiao.

How to lay mosaic on stone floor

The bottom treatment should be clean, and the uneven parts should be gently repaired first. The bottom layer should be cleaned without mortar, especially lime mortar and dirt. The ground should be wetted with water. When paving stone and porcelain bricks, it is necessary to place standard blocks, which should be placed at the intersection of crosshairs and diagonal equipment.

When paving, each row should be hung in sequence, and the stone should be soaked in water and then wiped after drying in the shade. It is very important to protect stone and tile after paving. It is necessary to water the equipment for protection after 24 hours. Cover the towel with sawdust after laying. Trying to spell and arrange is the key to judge whether it is good or bad. Choose a good slate yard, find a suitable elevation in the room to be installed, and try to arrange and spell the image according to the time of the equipment to adjust the image, the color depth and the smooth texture. Please give your opinions to Party A or the supervisor. After both ends are satisfied, they should be stacked in numbers regularly.

It is advisable to lay 1: 2 hard cement mortar first, that is, rub it by hand until it becomes frosty, and its thickness has been determined during trial laying. Therefore, according to the baseline, spread the contact layer of cement mortar, wet the cement slurry with drinks on the surface, increase the cohesive force and reduce the hollowing. Generally, spread it from the inside out, level it with a ruler, wash the board with water, lay a slate, align and level it, then tap it with a rubber hammer, find a good level and check whether it is hollowing.

The quality meets the following standards: clean surface, clear image, consistent color, straight periphery, no cracks, no corners and no defects. The variety and quality of stone meet the requirements of the scheme, and the surface and bottom layers are firmly bonded, without hollowing, hammering and inquiry.

Technical standard of stone floor mosaic

(1) The materials to be selected meet the relevant national standards for material collection and selection, and the commodity certificate shall be provided.

(2) The color shall meet the requirements, and there shall be no quality problems such as cracks and missing corners.

(3) The bonding between the plate and the bottom should be firm, and there should be no empty drum.

(4) Regular surface, consistent color, uniform seams and natural patterns.

(5) The edges and corners of the slate are positive, the mosaic image conforms to the plan, and the stitch is straight and natural.

(6) There is no fluffy powder speckles during the application period.

Through the summary of the above small series, we understand the laying of stone floor parquet and some aspects that need to be checked when laying. I believe everyone has a further understanding of stone floor parquet. There are still some places that need your attention when we are laying. I hope you can pay attention. I hope that through the above contents, it will be helpful to everyone when laying stone floors and spelling flowers, and I also hope that everyone can have a comfortable floor. Finally, I wish you a happy life.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~