Guitars are categorized by material~~~?

1, plywood piano (plywood piano): refers to the panel, back and side materials are made of plywood, do guitar plywood is generally 3 layers of veneer through the glue together, plywood piano is no tone to speak of, its wood sound part is replaced by glue, so that the sound is boring, plywood piano production is convenient, do not need to consider the drying of the material, the factory to do the plywood instrument is usually the way of joint handle is First make the drum, and then and the good neck through the dowel method to glue, this process is simple, but easy to cause the neck deformation, leaning forward to make the strings high, or the head tilted backward to cause hit the product, but its price is cheap (the reference price is less than 800 yuan). Personally, I think full plywood guitars can only be used for props or children's play, and it's hard to make progress in learning guitar with such an instrument.

2, veneer: refers to the production of guitar materials in the panel is the use of logs of veneer, but the back and side panels or the use of plywood to do the piano, I think as a musical instrument, veneer piano is the lowest grade requirements, at least one panel is the use of veneer, so that if you do a better job is to make the panel of logs to play the maximum potential, the choice of veneer piano, but also look at the neck, the general Africa, the use of materials, and the use of the neck, the general Africa, the use of materials, the use of materials. When choosing a veneer instrument, you should also look at the material used in the neck, generally African mahogany is the first choice, the material of the fingerboard is also very important, the best is ebony, followed by rosewood, of course, for the finished instrument has been done, the best way to choose is to ask a guitar teacher to play, try the feel, and then compared to the sound, according to the veneer back and side plate of the plywood material, the level of the panel and the fingerboard material is different, the market reference price of 1000-3000 yuan, more than this price. 1000-3000 yuan, more than this price should be the appearance of particularly good, or domestic factories to help foreign customers to do the labeling of the instrument.

3. Full veneer piano: the highest level of the factory piano, but also the most difficult to make, because the whole process must be completed in the house with temperature and humidity control, the panel and the back side of the board are made of logs, the process is complex, the side of the board after bending a good after a long period of time after the stereotypes, so the cost is high, even if the factory to do the number of is also limited, so the piano can play the original sound characteristics of the wood, the sound of the wood, and the sound of the piano can play the original sound characteristics of the wood, and the sound of the piano can play the original sound characteristics of the wood. The original sound characteristics of the wood, in all the guitars, to count all veneer acoustic guitar has the highest technical content, to do this kind of piano factory to be equipped with experienced piano testers and production workers can make the guitar well. The price of an imported full veneer factory instrument is upwards of 6,000-10,000 dollars.

4, handmade piano: not that handmade is handmade piano, factory piano is in a factory by a lot of people together in accordance with the provisions of the drawings to do, and handmade piano is mainly by a person to complete the value of the difference between prints and works of art, to do a handmade piano time is about a year is 20 or so, the handmade piano does not have a brand name, instead of the luthier's signature, in Spain, each of the 10,000 population of a handmade piano is a handmade piano. In Spain, there is one handmade luthier for every 10,000 people, and they are family-run workshops. They are family-run workshops, where the internal structure of the instrument is determined according to the different characteristics of each piece of material and the direction of the wood grain, the feel of the neck is made according to the requirements of the customer, and the customer is asked what kind of tone he or she wants, and so on, and so on. In the Spanish environment, luthiery has become a part of their life, they don't build luthiers for the sake of getting rich, as long as they have enough for the basic expenses of their life, they can do it. Therefore, Spanish luthiers can concentrate on making guitars, carving the interior of guitars carefully, and the small changes inside will affect the tone of the instrument. The price of handmade guitars abroad is about 3,000 dollars or more, and the handmade guitars will have the signature of the luthier.