Handmade flowers

Coke bottle manual flower encyclopedia step diagram-Baidu picture search

Tools needed to make exquisite artificial flowers with mineral water bottles: n mineral water bottles, acrylic pigments, canvas gloves, clips, oil painting pens, lighters, fine straws, blades and anti-fog mirrors.

1. Cut off the bottom of the mineral water bottle and cut it along the sunken gap at the bottom (as shown above). 2. Trim the extra part at the bottom of the cut coke bottle and make it into a flower shape.

3. Paint the pigment and evenly apply it to the bottom of the flower-shaped bottle. Exquisitely illustrated artificial flower coke bottle 4. Cut out the shape of leaves on the thin straw with a blade, and preheat it with a lighter to bend it.

In this way, leaves with flower diameters are made. 5. Cut out a small dot with a hard board and color it, and paste it in the middle of the flower as the flower core; Finally, stick the thin straws of the leaves under the flowers.

Method for making handmade flowers

Roll paper, also called roll paper, is a kind of paper art.

Originated in Britain in the18th century and spread among the British royal family, Xuan paper is a simple and practical art of life, which is completed by rolling, kneading and collage. It is often used in card packaging, decoration, painting and decorations.

The art of Xuan paper, also known as the decorative technology of roll paper, is to roll slender paper strips into small "parts" with special tools, and then combine these "parts" into works with complex styles and different shapes for creation. It is said that this fantastic paper art originated from European monasteries around15 ~16th century. At that time, in order to beautify religious utensils, nuns used feather purlins as props for rolling paper.

Flexible, tough, lively and elastic, and can be cut. Using the characteristics of paper to the extreme, the finished product can extend from the original plane to the three-dimensional world.

Roll paper is easy to make. It can be said that as long as you grasp the main points, I believe there is no better craft to learn. With a little patience and creativity, you can become a beautiful work. Xuan paper technology has always been regarded as the marginal art in paper art, because it transforms the carrier of sculpture and painting skills into paper, but it does not lag behind other art forms in artistic expression.

Traditionally, we will call facial paper roll paper because the basic material is curly paper tape. Like any other paper art type, swallow paper has its special tools and techniques. What's more attractive is that its unique charm makes many players fondle it. Some people with high papermaking skills have used inkstone paper as a means of making a living. When happiness and wealth are harvested together, life becomes more vivid and interesting ~ the paper is well prepared, and many players like the paper activities, but it is not enough to have good materials.

The charm of paper art lies in its infinite expressive power. Various expressive techniques highlight the all-encompassing nature of paper art, and Yan paper has always been regarded as an elegant model of paper art family. After all, in the past, paper art was mostly used as the decoration of religious relics, but since Yan paper technology entered the folk, not only the expression techniques were more diversified, but also the ingenious design itself showed the inherent artistic atmosphere of paper art vividly.

Appreciating Yan paper works itself is also to improve Yan paper skills. Paper used for color paper can have many colors. The most common paper on the market is colored paper. You can buy a pack of paper in one color. The color of this paper is gradually changed by a color system, such as red, green or blue, and some other colors.

Of course, if you plan a huge paper development project, the demand for color will be higher. At the same time, the market will also sell some paper used in a specific atmosphere, such as Christmas color, which will have red, green, white and a little gold and silver paper.

Some professional paper artists also use paper with gold-plated edges and pearl luster. The key part of.

The width of the paper used for paper development is also different, but for beginners, it is recommended to use a 3 mm wide paper strip. If you are a child, the paper strip should be wider, which needs 5 mm or 6 mm, so that they can hold it when developing the paper. Of course, this width is often used to make some independent rice paper works and tassels.

Paper strips with a width of 7 mm or 10 mm are usually used to make tassels or leaves, and also used to make some independent works. Sometimes, in order to add a sense of layering to the work, a smaller paper roll is placed on a layer of paper roll, and a piece of paper with a width of 1.5 mm or 2 mm is used.

It is very important to pay attention to the weight of the paper you buy. If the paper is too light, you will find it difficult to keep the shape you want.

For beginners, nothing is more frustrating than finding the paper roll opened by itself when it is about to be pasted, which is why many beginners try. When you roll up the paper roll, it should be able to keep its proper shape, so when choosing paper, you should remember that if you encounter the problem that the paper roll is difficult to form, it must be the wrong weight of the paper you choose.

Each brand sells different lengths of notes. Need to choose according to specific works.

Tools Paper spreading tools come in all shapes and models-metal, plastic, and even just needles that open at the eye of the needle. The most important thing is that you should choose a set of tools suitable for yourself and your thesis development project.

If you want to start making, make sure that the caulking at the top of your tool can accommodate at least 7 mm to 10 mm wide paper. Many people give up paper because they choose the wrong tools and can't make the shape they want.

The main reason is that the tool heads they use are too short. Only about 3 mm wide paper can be accommodated, which makes the periphery tilt upward during rolling.

A simple way to overcome this problem is to hold the top of the paper roll by hand while curling, but be careful, otherwise the paper roll will be dirty and torn. I believe this bad situation is also undesirable. So, first of all, you should choose a suitable sewing tool, so that you can easily make a flat roll of paper.

With the improvement of technical level, the action of rolling paper becomes instinct, and you will be surprised to find that you can make flat rolling paper even without the help of caulking. Many experienced Xuan paper artists will have a new set of tools that can adapt to different Xuan paper purposes, so it is not necessarily a bad thing that the tools you have now are not suitable for you.

Maybe gadgets will become very useful when making small rolls of paper. Beginners are usually advised to use those tools with wider caulking, and with the proficiency of skills, of course, those tools with narrower caulking can also be used.

Malinda Johson, an American paper exhibition artist, made paper directly with needles, while in Victorian times, women used hat needles to roll paper. Needle is actually difficult to use, but it is the best tool to use when making spiral paper.

Others don't need any tools at all when rolling paper, just rely on it.

Methods and steps of making ordinary paper flowers by hand

Materials to be prepared: colored paper and scissors. Specific steps: 1. Fold the square in half first, leaving a crease, and then fold it in half.

2. Fold one in the middle and customize the width, about 1 cm. After opening, the other side also repeats, based on the intersection with the diagonal.

3. Fold the two pairs into a square, and fold the vertex to the intersection of the two pairs, leaving a crease. 4. After opening, you can see that the crease is like this.

Then, press the yellow line to leave a crease, and the other three corners will do the same. 5. Now the crease is like this, and then the middle will start to polymerize according to the crease.

6. Look down from above. 7. Leave a crease between two points and do the same for the other three points.

8. The crease is basically completed. Turn it over and start to converge.

9. Polymerize slowly according to the crease. 10, convergence.

1 1. Fold the bottom up and open it for sorting. 12. The rose is finished.

.

How to make flowers out of paper cups? Completely manual method

The hand-made method of making paper cups into flowers is as follows: Required materials: disposable cups, disposable chopsticks, scissors, pencil, paper and oil pastel.

Process steps: 1. Prepare two cups and a pair of chopsticks. 2. Cut the cup from top to bottom with scissors and cut it into strips with uniform size. Be careful not to cut it.

As shown in figure 3. Fold the pieces from the inside out. As shown in figure 4. Fix chopsticks on the back of the paper cup with transparent tape.

As shown in the figure, 5. Color the middle of the circle, or cut out a circle with colored cardboard and paste it. 6. Take a piece of green paper, draw leaves on it, fold the paper in half and cut it open with scissors.

7. Glue the leaves to the chopsticks. 8. Paper cups are made into flowers, and paper cups are rolled in.

As shown in the figure, note that the handmade paper should be green and matched.

Handmade floret

Look at the following process. Ask me if you don't understand.

Cut the paper towel into a 12 square (two layers need to be disassembled, and a piece of paper is enough), and twist the two corners on the narrow side with your fingers until it looks good. If necessary, roll it up at the edge between your feet. 12 of them are like this. Take a bamboo stick and wrap the petals on it in a certain order (the front three or four are facing the bag, the back is circled, and the back three or four are wrapped in a gap). Wrap the petals with thread every few layers and fix them, and finally wrap them with thread.

Then find a piece of paper two centimeters wide, twist one end (like a petal) into a leaf, and wrap the ugly thread and paper under the flowers in front. The bottom one is wrapped around a bamboo stick.

That's enough. Just think about what you don't understand. Not difficult.

Or ask me on QQ. Not only facial tissue, but also crepe paper can be folded.

Below is a picture of a red rose folded with crumpled paper. The toilet paper was taken away by my classmates without taking photos. You can have a look.

If you wrap other things in the flower heart, such as chocolate and flower seeds, it can have special significance. Hehe, I hope you like this kind of flower.

How to make flowers out of paper cups? Completely manual method

The manual method of making flowers from paper cups is as follows:

Materials required:

Disposable cups, disposable chopsticks, scissors, pencils, paper, oil pastels.

Process steps:

1. Prepare two cups and a pair of chopsticks.

2. Cut the cup from top to bottom with scissors and cut it into strips with uniform size. Be careful not to cut it. As shown in the figure

3. Fold the cut from the inside out. As shown in the figure

4. Fix chopsticks on the back of the paper cup with transparent tape. As shown in the figure

5. Color the middle of the circle, or cut out a circle with colored cardboard and paste it.

6. Take a piece of green paper, draw leaves on it, fold the paper in half and cut it open with scissors.

7. Glue the leaves to the chopsticks.

8. Paper cups are made into flowers, and paper cups are rolled in. As shown in the figure

Matters needing attention

Handmade paper is prepared in green.

There is a kind of handmade flower with craftsmanship. What's its name?

Oh, that thing is called crystal flower. The main component of crystal flower is resin. The production process is as follows: Step 1, prepare tools: pliers, scissors, knives, sleeves and other tools. Step 2, prepare raw materials: including flower making liquid (transparent and various colors), gold and silver iron wire, colored adhesive tape, colored powder, crystal beads and some auxiliary materials, such as flower cores and flower stems.

The third step: modeling: firstly, the gold or silver thread is bent into the shape of petals and leaves one by one with the help of a sleeve, and several large petals and several small petals are made according to different levels of a flower until the calyx, large and small leaves and unopened small buds match after the flower. The basic outline of these crystal flowers must be prepared first (of course, you can also make an outline and touch it. Step 4: Dip in the liquid: put the prepared petals of gold and silver wire into the prepared flower making liquid, take them out when the petals are covered with the solution, and let them stand for a few seconds to dry, so that a crystal-clear petal or leaf is ready.

This step can be based on their own needs, when the solution is still wet, sprinkle some crystal beads or colored powder to increase the crystal flowers' crystal clear or colorful feeling and create a novel visual effect. Sometimes in order to create the effect of color transition of the same petal, it is necessary to touch a little more color at the tip of the petal to produce different shades of color, which is more realistic.

? If you like to pursue novelty, you can simply adjust the color to be more complicated, and make the crystal petals colorful, bizarre, completely abstract and very eye-catching. This practice is generally suitable for making beautiful brooches and other accessories.

Repeat the above actions until all the accessories needed for a flower are ready. Step 5, combination: combine the prepared petals into a flower shape, from small petals to large petals to calyx, wrap them together and fix them with colored tape layer by layer, then add the flower core, connect the stems, add the leaves, and wrap them neatly from top to bottom with the same color tape, and a crystal flower will be made.