Design department of water quality testing laboratory

The laboratory can be divided into: atomic fluorescence room, ion chromatography room, liquid chromatography room, microbial detection room, radiation room, dressing room, central laboratory and so on.

Atomic fluorescence chamber

The area is > 12m2, and there must be no large machinery with strong vibration around it. The instrument for preventing direct sunlight has no heat source except water heating and air conditioning, the ambient temperature is (15-30) C, and the relative humidity is not more than 75%.

Microbial detection room

The operator enters the preparation room and enters the operation area from the preparation room through the first shift, the second shift and the buffer zone respectively, and there is a local ventilation exhaust cabinet. The culture room needs constant temperature and sufficient power supply. A centralized room is set at the entrance, and multiple culture rooms (such as mold culture room, bacteria culture room, solid culture room, liquid culture room, etc.) can be set according to different culture conditions and types. ).

Ion chromatography chamber

There should be no strong magnetic field and flammable and corrosive gas around the analysis room. Keep the indoor space unobstructed, and have a budget to configure air conditioning. Indoor ready to bear a complete set of instruments, the width and height of moderate, easy to operate the working platform. General factory cement platform is better (0.6 ~ 0.8m high). The platform should be 0.5 ~ 1.0m away from the wall to facilitate wiring and maintenance.

Liquid chromatography room

Instruments and equipment mainly include: high performance liquid chromatograph, which is suitable for high boiling point compounds, volatile compounds, thermally unstable compounds, ionic compounds, polymers and so on. To make up for the shortage of gas chromatograph.

Radiation chamber

It is located on the first floor, close to the emergency department and inpatient department, and has a budget design. The internal channel, the patient channel and the medical staff channel are arranged separately.