Traditional Culture Encyclopedia - Traditional festivals - How to adjust drift
How to adjust drift
Simple drift adjustment method: 1. Step 1: Find the bottom with the lead pendant (the lead pendant must be greater than the buoyancy of the float, that is, find the bottom with the lead fishing method) 2. Step 2: Pull down the float (generally to the length of a float, as long as the pull-down length exceeds the length of the sub-line) 3. Step 3: Trim the lead skin to make the required grid float.
For example, if you adjust four eyes, trim the lead skin to four eyes. Fourth, the fourth step: hanging bait to find the bottom. Generally, the bait size is normal. At this time, the float must sink into the water, because the float is pulled down during adjustment. Step 5: Adjust the buoy to the number of nets you want to catch. At this time, do you want to pull the float up, or because the float is adjusted to half the water, the bait float will sink into the water. Just pull the float up to the number of nets you want to catch, such as adjusting four to catch two, which is to pull it up to the second destination.
After the selection method of floats, let's have an intuitive understanding. First understand its material from the manual, then hold it in your hand with your thumb and forefinger, and carefully observe whether the floating body is even, whether the floating tip and floating foot are in a straight line, whether the floating tip is clear in color, whether the interval is even, whether the paint decoration is perfect, and so on.
Slide the float from top to bottom and feel its concentricity and paint thickness. The center of a good float must be on the central axis.
Put the float on the smooth ground and blow gently with your mouth. If it rolls quickly and smoothly without shaking, then it is a good float, and vice versa. References:
Baidu encyclopedia-fishing.
How to adjust drift quickly and accurately
Although there are many ways to adjust drift, there are only a few steps. As long as you are skilled, no matter which one can be adjusted quickly! Steps to adjust and find the mouth 1. Steps of leisure debugging crucian carp fishing: (1) Basic steps of debugging fishing bottom: 1. Rough bottom finding: heavy lead is hung on the lead base, and the weight of the lead is greater than the buoyancy of the float. All the floats are submerged in the water, and the floats are gradually pulled up until one eye is exposed. The top space bean is next to the second space bean, and the positioning is completed. Remember the most.
(At this time, you can hang up or not. 2. eye adjustment: hang the auxiliary line and float downward for about 30 cm (remember that the distance of downward drift is greater than the length of the long line+10 cm). At this time, the float should be completely submerged in the water, and gradually cut the lead skin until the required mesh is exposed (adjust the mesh).
3. Basic principles for setting the eye adjustment and fishing purpose of crucian carp: 7-mesh soft-tailed floating bait: 4-5-mesh soft-tailed floating bait: 2.5-4-mesh hard-tailed floating bait: 7-9-mesh hard-tailed fishing bait: 4-7-mesh hard-tailed fishing bait: 2-3-mesh high and dull; Fishing low, fishing spirit. According to the weather, season, bait proportion, bait ball size, fish mouth and other factors, fine-tune and adjust the eyes: 4. Accurate bottom finding: move the float, adjust the distance between the position of the float seat and the position of the upper space bean is roughly equal to the length of the sub-line, lower the hook and rub the bait to hang a big bait ball to find the bottom (also make a nest), so that the float comes out of the water for 2 eyes, and continue to pull the float for 2 cm. If floating,
5. During the adjustment process of trial fishing (1), there is no fish in the mouth: fishing is too clever, pull up and float for 2CM (less than 5 times in a row), and fish the upper lip for more than 2 times in a row to find a suitable mouth. (Tailing can be understood as finding the bottom incorrectly, but still leaving the bottom) (2) The fish in the middle is on the mouth or chin, indicating that fishing is too dull. Pull down the float 1 cm at a time until the fish on the upper lip is found more than twice.
(Too dull can be understood as finding the bottom incorrectly, and it has already passed the bottom) (3) No mouth to grasp the bottom: every time you pull down the float 15 cm, you can find the water layer where the fish is. This belongs to the category of fishing from the bottom-floating-fishing at a standard depth, so it is necessary to cut the lead again and adjust the floating, so that after hanging the double bait, the floating will show about 2 eyes. Let's put it another way. (2) Lead fishing method: 1. Scope of application: used when running water or small miscellaneous fish are hooked, and the fishing method is similar to traditional fishing.
2. When there is no hook in the lead drift step (1), heavy lead will reach the bottom. (2) The float is pulled down by 20CM, and the lead skin is cut flat.
(3) The space beans on the shot put open about 5 cm. (4) Hang the parting line, and pull the float up until 2-6 meshes are exposed, which can be used for fishing, and the rapids reveal more meshes. 3. Precautions for Lead Fishing Method (1) In running water environment, the float should be as large as possible with strong positioning ability, such as the No.3 float in Dao Lang A 1 18.
(2) The sub-line within10cm should be as short as possible, because the lead fishing is extremely blunt, and the short sub-line can amplify the signal. (3) To grasp the movements up and down, you can catch fish.
(4) The bait can be properly adhered. Second, the detailed steps of leisure fishing: 1. If the floating phase only rises slowly without the next bite, or the floating phase only rises and then falls slowly, it can be adjusted by pulling it down. There will be no slight fish until there is a slow rise.
2. The drift phase only rises slowly, but there is no next decline. It is ineffective to adjust the fish eye by pulling down the float, which is mostly related to the state and size of the bait. The bait state and bait application method can be adjusted in time before inquiry and exploration. 3. If the floating phase only rises slowly, but there is no next bite, and adjusting the fish eye, adjusting the bait state and feeding the bait are all ineffective, then you can reduce the lead and find another bite until there is a simple slight bite and fish.
4. The drift can't be lowered to the set fishing target, or the top can't be dropped for a long time. After excluding factors such as inaccurate throwing and bait loss, it is mostly caused by fish interface. You can also pull down the drift adjustment or reduce the lead to find the mouth. There are many fish in the nest, but there is still no mouth to adjust the fishing eyes. Check the hook sticking rate and atomization rate of bait.
At the same time, it is necessary to check whether the fishing is too dull, whether the drift fishing and bait fall into the virtual sediment layer that the fish mouth does not admit. 6. The adjustment of fisheye dullness belongs to no mouth, and the adjustment of bait state and bait throwing method are also invalid. It can reduce lead, increase eye adjustment, increase the carrying capacity of bait, expand the range of eye adjustment, let bait have more levels to choose from at the virtual bottom, and then find bait again until there is a simple slight mouth opening, and the fish is caught.
7. After the drift rises slowly, it will suddenly stop. It belongs to the Qingming positive phase, but it always misses the fish. It is related to the state of the bait, and it is most common that the bait is too hard and too big. It is necessary to adjust the bait state and feeding method in time, and then ask questions. 8. There was a direct bite in the drifting stage, but many fish were not caught. You can pull up the drift and adjust it. You can find the standard mouth and catch fish.
Third, competitive bottom fishing 1, eye adjustment and eye fishing settings: generally, peacock feathers with soft long tail are adjusted to 3 eyes 1 line, fishing 3 eyes 1 line, catching the first line to eat, and the third class is better. Adjusting 3 mesh 1 line means on-site debugging after assembling the fishing group. By increasing or decreasing the lead skin, when the hook does not sink to the bottom, only 3 meshes plus about 65,438+0 meshes are exposed to the water.
Fishing with three eyes and one line is to change the position of the float after loading the bait, so that the float shows three eyes plus 1 eye. Just catching a line to eat is a signal to catch a float and lift the line when fishing.
Winter: Peacock feathers float with a soft long tail, with two eyes and one line, fishing with two eyes and one line, catching one line to eat, and it is better to divide them into three grades. Condition 1: light bait, bait ball with normal size. When using the hook with normal size, the bottom hook falls to the bottom, and the hook lightly touches the bottom.
Condition 2: Find the bottom.
2. Real floating-point signal (1). When the pendant is in place and the hook and auxiliary line swing downward, the float will sink slowly and evenly. After the bottom hook is in place, the hook continues to sink, and the sinking signal of the float will slow down, which is the signal of the float itself.
In this process, as long as the signal law of the float itself is destroyed, the fish will eat it. Fish fishing, although the signal is chaotic, but this signal is often very real.
(2) After the double hook is in place, the truest signal is that it floats slightly, or it is cloudy. (3) When the hook touches the bottom, wait for one minute at most. If the fish doesn't eat the hook, gently drag it back. Note that the tail will move at a uniform speed during the dragging process, and strange signals can be seen during the dragging process (some fish don't eat this "provocative" food); Or, just finished.
How to adjust drift correctly
How to accurately adjust fishing for more than ten years, although there are not many impressive achievements, but also learned and mastered some fishing knowledge and experience. I will share it with you today for reference only, and give me some corrections.
Let's talk about how to adjust the drift accurately today. I think two baits can be in four States by floating: two baits are undercover, one is lying and touching, one is touching and hanging, and two baits are floating. The traditional fishing method is lead-dropping undercover, which is called "double bait undercover" or "stupid fishing"
This method is simple, so I won't say it here. Today, I'm going to talk to you about the so-called "Taiwan Province fishing" (fishing method in Taiwan Province Province). This floating method of lead pendant is the last three ways: one lying, one touching, one hanging and two baits hanging.
Taiwan Province fishing method has the characteristics of high sensitivity, high speed, plenty of fish, strong competitiveness and entertainment. "Double bait suspension": firstly, select a float, put it in the float seat, don't hang bait on the hook first, then throw the fishing rod into the water, and make the water at the tail of the float less than the whole eye by increasing or decreasing the lead skin.
For example, if your tail has nine eyes, you can make it eight eyes out of the water, which is the so-called "eight tones"; If your drifting tail has six eyes, you let it out of the water with five eyes. This is called "adjusting five eyes". The two hooked baits are adjusted by the size of the two baits or the specific gravity of the baits (the baits should be as thick as possible, so that they will not melt in a short time after launching, and it is accurate to watch the drift), so that the floating tail is exposed to one eye or two eyes (that is, one or two eyes are caught), and then the floating seat is moved to make the two suspended baits at the required water depth.
"Lie down and touch": Choose a suitable float, put the float on the float seat, don't hang bait on the hook first, then throw the fishing rod into the water, and make the tail of the float out of the water by increasing or decreasing the lead skin. This is the adjustment of four (several) eyes. At this time, choose a hook to hang the bait, adjust it by the size or specific gravity of the bait, and let the floating tail slowly sink into the water. At this time, the bait is hung with double hooks, and the bottom is found by moving the floating position, so that the floating tail is exposed to one eye or two eyes (that is, fishing one or two). At this time, the two baits are lying and touching.
When the bait becomes smaller until it is gone, the drift remains unchanged; When the contact bait gradually becomes smaller, the drift gradually moves up until the water surface is above four eyes. "One touch and one suspension": Choose a suitable float, put it in the float seat, don't hang bait on the hook first, then throw the fishing rod into the water, and make the tail of the float out of the water by increasing or decreasing the lead skin. This is four (several) adjustments.
At this time, choose a hook to hang the bait, and adjust it according to the size or specific gravity of the bait, so that the floating tail emerges from the water with one eye or two eyes (that is, catch one or two). At this time, if you hang the bait with a double hook and then throw the fishing rod into the water, the floating tail will not come out of the water. Move the position of the drift to find the bottom, so that the drift tail is exposed to the water for one or two eyes, and then the two baits are in a state of contact.
This state is our common way of fishing now. It should be noted that different floats have different buoyancy characteristics, and different bait sizes or specific gravity have different weight pressures, so the water pressure of a bait is different.
Therefore, you can adjust the size and proportion of the drift or bait according to your own habits to achieve the desired effect. When fishing, you should choose the fishing method according to the actual situation, don't stick to the rules, and be flexible.
How to drift fishing?
Simple solution: You can fill your washing machine with water and adjust the ratio of drift to kilo (tin and lead). When fishing, you can appropriately increase the weight of one thousand catties, add a little, try several times, throw them into a fixed water area and see the drift reaction.
Simple is simple: first of all, remember: it must be half water.
The distance from the drifting tip to the hook shall not exceed the water depth. How did you know? It's very simple: wrap lead around the lead base several times, move it to the minimum distance in the direction of the hook, throw it into the water, float up and sink into the water, and you won't get out. It is suggested that the lead be cut off bit by bit and the floating tail be exposed to the water. This state is the water balance mentioned in Taiwanese fishing! That is to say, the buoyancy of the floating tail at the four-eye point is in balance with the space bean, lead leather connecting ring and double hook below, that is, gravity = buoyancy. Once this state of balance is broken, the floating eye will change.
How to adjust drift
If the water is not deep, you can try the traditional seven-star drift and copy everything below.
Semi-Shui Piao regulation 1, the essence of Taiwan fishing group and Taiwan fishing group is that it can respond to the signal of fish eating very sensitively. Its fishing group is fine-small rod, thin line, small float (long streamlined float, thin tail), light drop, small hook, and long brain line (line that is the hook).
As for how to assemble, here are detailed pictures and texts, which are clear at a glance and don't take much effort. After everything continues, it is a trial drift and drift adjustment.
Generally speaking, the written materials are about adjusting four eyes and catching two eyes, which is the basis of introducing Taiwan Province fishing. I also use it as the basic parameter of drift adjustment.
The so-called purpose is to make the float surface in four small squares, one for each eye and four for each eye. The so-called two-eyed fishing is to see two small squares exposed to the water, watch them float or sink, and move horizontally to judge the situation of fish biting the hook.
At this time, people who learn to fish may be confused. Why do you say two eyes when fishing? There are two shortcomings, don't worry, this involves the key to fishing in Taiwan Province and the fishing methods that are circulated among our people. Our folk fishing method is generally called traditional fishing. The pendant of the traditional fishing group is lying on the ground, and its gravity is greater than the buoyancy of the float. Usually catch a few eyes after drifting.
Taiwan Province's fishing pendant hangs in the water. Its gravity is less than the drifting buoyancy, which is the essential difference between the two.
When I say "four eyes", I mean that when I adjust the float, I will put my eyes out of the water. Two-eye fishing refers to the two eyes exposed to the water when fishing, and the missing two eyes are the weight of the bait, because as mentioned above, the fishing group of Taiwan fishing is suspended in the water with empty hooks.
Therefore, when the bait is put into the water with a double hook (the size of the bait is about the size of soybeans), the float will naturally sink two eyes, leaving two eyes on the water, and the remaining two eyes are the so-called "fishing two eyes", and the four eyes that begin to appear on the water are the so-called "adjusting four eyes". Do you want to understand the origin of the professional saying "four eyes catch two eyes"? How to adjust these four eyes? 1). Let's wrap the lead skin around the lead skin seat first, and then lift the pole into the water to find the depth. This is called finding the bottom.
If you can't see the float after entering the water, move the float upward until the tail of the float is flush with the water surface. 2) Then, lift the pole and move the floating image downward (there are two space beans above and below the floating base), but don't move the top space bean for the time being, because it depends on the depth of the water and plays a positioning role. I'll use it when I trim lead skin in the future.
3). If the fishing group floats on the water after entering the water, move the float downward. Until you find the depth mentioned above.
4) Lift the pole and move the float down to half the distance between the space bean and the bottom hook, which is less than the actual water depth. Or simply move the float near the pendant and trim the lead skin with scissors.
Note: Be careful and cut less until the float shows four eyes in the water. At this time, the work of adjusting the four eyes is completed. If you are familiar with the process of trimming lead skin, you can also adjust the 5, 6, 7, 8, 9, 10 eye in the same way. You can also dial 1, 2, 3, 3 to see how you want to adjust it and how much you need.
The key is to trim the weight of lead skin! Some people may ask, how do you adjust your eyes? Lead is very light. So you won't replace a large piece of lead and repair it? Stupid you.
:) 5). The next step is to adjust the drift of Taiwanese fishing and find the bottom. At this time, you need to prepare a small piece of lead skin and wrap it around the bottom hook. Attention! It must be the small hook at the bottom! Then lift the pole into the water. If you can't see the float, move the float upward until the four eyes that started to adjust are exposed.
Then lift the pole, remove the lead from the hook, put the fishing tackle in the water and see how many eyes the float shows. If there are four eyes, move the float up slightly until the five eyes are out of the water. Why show your eyes? Because I found the bottom with lead leather, but I only know the general situation of the hook in the water.
After taking the lead skin, the buoyancy of the float is greater than the gravity of the fishing group below, so it will float. We don't know the distance of this float. If the float is large, two baits will be off the ground when the ears of the same size are hung with double hooks.
Instead of the best state of a single bait touching the ground. When the float is adjusted to the fifth purpose, it means that the underwater single hook has really been found! ! Because after the single hook landed, the force balance maintained by the four eyes in the original suspended state was broken due to the support of the brain line.
The next job is to carefully move the float down bit by bit. It's best to just, just keep your eyes on the water.
Note: it must have moved from five eyes to four eyes! ! ! 6). So far. There is only one last task left, which is to move the float down two orders.
At this point, the whole bleaching process is completed. A friend wants to ask, I have adjusted to four eyes, why should I move my eyes down? Hehe, it's actually very simple.
Because we adjust four eyes and catch two. The above is very clear.
Four eyes are in the state of empty hook without bait, and two eyes are in the state of fishing with double hooks and ears. The weight of these two bait balls is just enough to make the fish drift and sink their eyes, thus achieving the best sensitivity for two purposes. When we just showed the four purposes, the state of the fishing group in the water happened to be that the bottom hook gently rubbed and landed, and it didn't seem to be touched.
If the bait is not at its best. We move the float down two eyes, which is equivalent to leaving the weight of two bait balls. If we are fishing with bait at this time, it must be that the float sank two eyes on the basis of the adjusted four eyes, and the water left two eyes.
That is, two eyes should be caught. At this time, the state of the underwater fishing group is that the bait group has just touched the ground and really reached the best state of the whole fishing group.
2. If you want the response of the fishing group to be dull, then move the float upward to reach a relatively dull state where one hook is lying underwater and one hook is suspended, or one hook is lying underwater and one hook touches the ground slightly, or two hooks are lying underwater and the fishing group below the lead falls is lying underwater. To be sensitive, everything has to be reversed.
Both hooks are suspended after the bait is hung. 3. Pay attention to the problem of drift after choosing the fishing position: 1.
Don't reduce the lead skin first, throw it into the fishing spot, and then completely float into the water. Throw a few more points, and you can try the inequality at the bottom.
Excuse me, how to adjust the drift and how to calculate the drift?
The first contact with fishing gear is rod, line, drift and hook. At first, I turned a blind eye to everything. Some spent a lot of time and material resources, but I still went further and further. Some people find the straight road through guidance and avoid many detours. Take the float as an example. Nowadays, many manufacturers produce all kinds of floats, which is dazzling and I don't know which one to choose.
Floats can be roughly divided into five categories: soft carbon legs, hard tail floats, soft bamboo legs, hard tail floats, hard tail steel legs, and ultra-long floats. Their styles include long and short carbon legs, long and short carbon legs, (with broken tails), soft bamboo legs, and ultra-long steel legs. Wait a minute.
Different types of floats have different performances and different uses. For example, the selected floats are used for leisure fishing, and the pursuit of performance is not too high. It is enough to have floats that cadres can understand themselves. In the competition, there will be different environments and different fish conditions, and each drift type has its own different uses. Carbon leg soft tail drift has good stability in water, strong wind resistance, relatively true drift letter and good next signal, and is usually used for fishing in competitive competitions.
Carbon leg hard tail drift, its performance is that it is a little slow to turn over in the water, but the next step is fast and the drift letter is obviously accurate. Used for rubbing bait and pulling bait for bottom fishing miscellaneous fish. Bamboo legs are short, the tail is hard, the performance turns over quickly in water, and the drifting property is good. It is often used to fish in Shui Pi and catch fast fish in competitions.
Bamboo has long legs and hard tail, which can turn over quickly in water and has strong floating reliability. It is often used for floating fishing in competitive competitions. Steel leg hard tail drift is often used for bottom fishing for miscellaneous fish because of its fast turning over in water, strong stability, reliable drifting, good maneuverability and strong cutting power.
There is also an ultra-long carbon leg float with a long tail, mostly 40-65 cm in length. It has good performance, strong wind resistance, and can be as stable as Mount Tai in strong winds and waves. In the competition, because of its long float, the angle between the main line and the floating leg can be reduced in the water, which is much larger than other floats, and it is often used to catch miscellaneous fish at the bottom of the water. Submarine fishing.
After selecting the drift, you can catch the fish. If you want to catch a good fish, you must adjust the drift. First of all, you must abandon secular ideas. The traditional fishing method was gradually forgotten by competitors and replaced by Taiwan Province fishing, also known as hanging fishing. No matter whether it is bait or empty hook, it should be debugged without the double hook touching the bottom. If the hook touches the bottom and the drift is inaccurate, novices should pay special attention to this, which is also a key step to break away from traditional fishing.
Double bait drift adjustment: this is the easiest to understand. Of course, before drifting, you must first make sure that the bait you rub is basically the same, and then hang the double bait and half water for debugging. When entering the water, the float will slowly sink under the weight of the bait until the tail sinks completely. When debugging, just cut off the weight of lead slowly until the fish eye (one eye, two eyes or three eyes) you want is exposed at the tail, such as adjustment. However, we should be concerned about whether the baits we rub are all the same size, and during the launch, the baits will atomize some weight, and the double baits will leave the ground after several adjustments. In order to avoid this problem, you can catch two eyes if you adjust a purpose with double bait. Three eyes, even five eyes and six eyes can be caught. As long as you like, you can catch lead directly and become a traditional fisherman. As long as there is a drifting letter, bold and slow fishing is also possible. For fishermen, if they are not afraid of floating, they are afraid of floating.
Single hook drift adjustment: only use an empty hook when debugging, adjust it several times, first ignore the weight of a hook, then put on the hook set after adjustment, so that the drift tail is exposed from the water to adjust the fish eye when fishing. At this time, the bottom hook must be undercover, and the hook just touches the ground. This adjustment method is simple and practical. For single bait adjustment, first of all, the empty hook will not go to the bottom, {hanging a bait ball will slow down the atomization of the bait ball to be adjusted}. When launching, the float will slowly sink under the weight of the bait ball. When debugging, just cut off the weight of the lead skin slowly until the fish eye (one eye, two eyes or three eyes) you want is exposed at the tail of the float. After adjustment, hang a double bait and throw it into the fishing ground. The float will sink slowly with the weight of the double bait. Fishing with three eyes, this drift adjustment method absolutely ensures that the bait ball goes to the bottom and the upper bait ball is suspended, so that the weight of the two baits will not sink because of insufficient floating force, and the buoyancy of the float will not be too large because of blindly adjusting several catches.
There is a phenomenon that the bait ball can't reach the bottom and can't be found. The purpose of this adjustment method is to make half the weight of the bait ball suspended by the buoyancy of the float and the other half supported by the bottom. The debugging of this method is the most scientific among many adjustment methods. Roll the lead skin on the lead skin seat, and the lead skin must be tightly wrapped.
If you don't fish, loosen the lead skin as soon as you push, and then put it in the water. As shown in the figure, the weight of lead makes the float sink into the water, because the buoyancy of the float is less than the weight of lead. After the float sinks into the water, move the float upward to increase the waterline until it comes out of the water.
In this way, the depth of water can be measured, and the length of water depth is the distance from the fishing line under the eyes to the lead-based end. So that the water depth can be measured.
After measuring the water depth, you can adjust the drift, adjust the distance between the drift and the lead base to half of the water depth, and then put it into the water, at which time the drift sinks into the water again. At this time, you can cut off the lead skin on the lead skin seat bit by bit with scissors, and be careful not to cut too much at a time.
Every time the lead skin is cut off, the weight of the lead skin will be reduced a little. As the weight of the lead skin is gradually reduced, when the weight of the lead skin is less than the weight of the float, the float will slowly surface. Let the float float on the water for 4 eyes. If the float rises above 4 meshes, add some lead leather on the lead leather seat to reduce the float to only 4 meshes.
Then hang the food on the hook and put it into the water, and then it will float and sink into the water. This is because the weight of lead skin and food is greater than the buoyancy after hanging food.
What you have to do at this time is to lift the float up until it is 3 eyes above the water, and put it down until it is 3 eyes above the water. This is what Taiwan fishing calls "adjusting 4 fishing and 3 fishing", that is, adjusting the empty hook to 4 meshes after floating out of the water and then to 3 meshes after feeding.
You can adjust 4 fishing 2, 6 fishing 3 or 4 in combination with the above methods.
How to adjust drift correctly
How to adjust drift accurately
I have been fishing for more than ten years. Although I don't have many impressive achievements, I have also learned and mastered some fishing knowledge and experience. I will share it with you today, for reference only, and correct me. Let's talk about how to adjust the drift accurately today.
I think two baits can be in four States by floating: two baits are undercover, one is lying and touching, one is touching and hanging, and two baits are floating. The common drift adjustment method of traditional fishing is lead-dropping undercover, which is called "double bait undercover" or "stupid fishing". This method is simple, so I won't talk about it here. Today, I'm going to talk to you about the so-called "Taiwan Province fishing" (fishing method in Taiwan Province Province). This floating method of lead pendant is the last three ways: one lying, one touching, one hanging and two baits hanging. Taiwan Province fishing method has the characteristics of high sensitivity, high speed, plenty of fish, strong competitiveness and entertainment.
"Double bait suspension": firstly, select a float, put it in the float seat, don't hang bait on the hook first, then throw the fishing rod into the water, and make the water at the tail of the float less than the whole eye by increasing or decreasing the lead skin. For example, if your tail has nine eyes, you can make it eight eyes out of the water, which is the so-called "eight tones"; If your drifting tail has six eyes, you let it out of the water with five eyes. This is called "adjusting five eyes". The two hooked baits are adjusted by the size of the two baits or the specific gravity of the baits (the baits should be as thick as possible, so that they will not melt in a short time after launching, and it is accurate to watch the drift), so that the floating tail is exposed to one eye or two eyes (that is, one or two eyes are caught), and then the floating seat is moved to make the two suspended baits at the required water depth. "Lie down and touch": Choose a suitable float, put the float on the float seat, don't hang bait on the hook first, then throw the fishing rod into the water, and make the tail of the float out of the water by increasing or decreasing the lead skin. This is the adjustment of four (several) eyes. At this time, choose a hook to hang the bait, adjust it by the size or specific gravity of the bait, and let the floating tail slowly sink into the water. At this time, the bait is hung with double hooks, and the bottom is found by moving the floating position, so that the floating tail is exposed to one eye or two eyes (that is, fishing one or two). At this time, the two baits are lying and touching. When the bait becomes smaller until it is gone, the drift remains unchanged; When the contact bait gradually becomes smaller, the drift gradually moves up until the water surface is above four eyes. "One touch and one suspension": Choose a suitable float, put it in the float seat, don't hang bait on the hook first, then throw the fishing rod into the water, and make the tail of the float out of the water by increasing or decreasing the lead skin. This is four (several) adjustments. At this time, choose a hook to hang the bait, and adjust it according to the size or specific gravity of the bait, so that the floating tail emerges from the water with one eye or two eyes (that is, catch one or two). At this time, if you hang the bait with a double hook and then throw the fishing rod into the water, the floating tail will not come out of the water. Move the position of the drift to find the bottom, so that the drift tail is exposed to the water for one or two eyes, and then the two baits are in a state of contact. This state is our common way of fishing now. It should be noted that different floats have different buoyancy characteristics, and different bait sizes or specific gravity have different weight pressures, so the water pressure of a bait is different. Therefore, you can adjust the size and proportion of the drift or bait according to your own habits to achieve the desired effect. When fishing, you should choose the fishing method according to the actual situation, don't stick to the rules, and be flexible.
- Previous article:Is the well box fried rice a pre-made dish
- Next article:The best route for a three-day tour from Luoyang to Luanchuan
- Related articles
- There are several kinds of seafood cuisine in Belgium, how is the food culture in Nordic Belgium, do you have any favorite cuisine?
- Steps of traditional Osmanthus Jelly practice
- What brand of fishing rod is good?
- Half a Class: Historical Journey: Really Integrating Teaching into the Classroom
- Dragon transport method
- Chen Peiqiu is a master of calligraphy and painting. What new style of Chinese painting did he create?
- Smart toilet VS ordinary toilet: which is more suitable for your needs?
- Types of anaerobic reactors
- How about the treatment of senior computer engineers and software engineers? What are the working hours and how are the rest hours arranged? Do you have many holidays? Are you tired?
- How does the projector watch TV channels?