Rubber band knotting method

Rubber band knotting method is as follows:

1, prepare rubber band.

2, one end of the set on the index finger of the left hand, pinch the other end of the hand to stretch.

3, use the ring finger below to change the stretching direction of the leather band.

4, the other end returns, as shown in the picture.

5. Pull the rubber band sleeve below to expand it.

6. Wrap one end around the rubber band and insert it into the sleeve as shown.

7. Pull the ends tight.

8, knot finished.

Rubber bands are a rubber and latex made of short loops, generally used to tie things together, invented on March 17, 1845 by Stephen Perry. At the same time, it was modified to be used for women to tie their hair.

Tying knots:

The double-single knot, the double-single knot is designed to make a round knot. In fact, the double-single knot is no more complicated than the single knot; it's really just a matter of folding a piece of rope in half and tying a single knot. If the looped part of the rope happens to be the part of the rope that is broken, it can still be used without worry as it is not able to produce force application.

Flat knots, which are used quite frequently in everyday life, can also be used as a way to connect two ropes by first crossing the ropes, then twisting the ends of the ropes and pulling them together, then crossing them again, and then twisting them again on top of the cross. At this point, if you wrap the rope in the wrong direction, the result will be an outward flat knot, so please be especially careful, and finally hold both ends of the rope and pull it tight.

Weighing the human knot, which is widely used in outdoor work, first wrap the rope around the thing you want to hang, or leave a space if not, and cross the rope with your hand cupping the rope head, paying attention to the head of the rope should be on the top.

Then put your hand under the rope and straighten your hand, which is equivalent to letting the rope out of a circle, then put the rope head from the rope under the rope, pay attention to pinch the rope head, and then tighten it.