What are the tools called for nailing the soles of shoes

Awl, twine, thimble. Shoe-knitting is a traditional shoe-knitting process. The traditional thousand-layer sole is a typical representative of handmade shoe soling. Because the soles are made of white cloth framed into a gusset and stacked in multiple layers, they are named after their image. The finished product is comfortable to wear, lightweight and non-slip, warm in winter and breathable and sweat-absorbent in summer.

To do the shoes first gusset, the rags paste on a board, a layer of stacked layer, until a millimeter thick before stopping, and so completely dry after uncovering, according to the size of the shoes in order to draw a good, cut and molded, stacked together, and began to Na bottom.

Na soles are generally women, one hand holding an awl, one hand manipulating the needle, a tie and a sewing, pulling the twine clanking. After each stitch. Must be hemp line in the cone handle around a few times to tighten the force, and then the next needle. Highly skilled, the sole of the footwear stitching dense, very rich in rhythm, beautiful.

When making the soles, the soles should be kept clean, the threads should be crossed, the edges should not be out of shape, the threads should be neatly arranged, there should be no distortion, the vertical and horizontal intervals should be even and the soles should be properly spaced out, and the surfaces of the soles should not be uneven, or else they will be regarded as unqualified.

Finally, you have to remember to cut the bottom edge of the shoe. Firstly, you should level the soles with a hammer, in order to soften the soles, and make the shoes more comfortable to wear. The second is to cut the edge of the remaining edges of the sole of the nano system, will be cut with a special tool, the cutting needs to be smooth, do not leave obvious knife marks.