How to choose the angle of veneer fixer

Abstract: Snowboard fixer is a tool to connect snowboards and ski boots, which plays a fixing role. The fixer is divided into front and back parts to adapt to different sizes of ski boots. The angle selection of veneer fixer should be adjusted according to the specific station and snowboard type. For example, the angle of the front and rear foot fixers of the racing board is between +35 degrees and +70 degrees; The angle of the front fixer is 15 ~40 degrees, and the angle of the rear fixer is 0 ~30 degrees. The following is to introduce the installation method and steps of veneer fixer for everyone. Let's have a look! 1. What is a snowboard binder?

Fixator is an important part connecting snowboards and ski boots, which plays an important role in protecting the personal safety of skiers. The fixer is divided into front and back parts, which are directly fixed on the snowboard by screws. The front fixer can't move, and the rear fixer can move back and forth along the snowboard to adapt to different sizes of ski boots.

Second, how to choose the angle of veneer fixer

The angle selection of veneer fixer should be adjusted according to the position and type of snowboard veneer used:

1, depending on the station selection.

(1) Mountain Station

Used for racing narrow board, one-way sliding (the tail of the board is square), hard-soled shoes, and the angle of front and rear foot fixers is between +35 degrees and +70 degrees. In general, the front foot angle is more than 5 degrees larger than the rear foot angle, so as to keep good control of the board during small bends.

(2) Forward station

It is often used in the station where the free board or chasing board slides. The angle of the front fixer is 15 ~40 degrees, and the angle of the rear fixer is 0 ~30 degrees. From the point of view of human structure, the angle difference between the front and rear fixators should generally not exceed 265438 0 degrees. A common configuration of mountain slip angle is 2 1 degree and then 6 degrees. If you like carving, you can choose 30 degrees before 15 degrees.

(3) Duck Station

The common anchor angle configuration in ski resorts in China is generally 0~30 degrees for the front anchor and-1~-20 degrees for the rear anchor. In this posture, when standing naturally, the front and rear knees face the head and tail of the board respectively, and the shoulder board is parallel. From the perspective of human structure, the angle difference between the front and rear fixators should be at least 10 degrees, and the common configurations are front 18 and rear -6, or front 15 and rear 15.

2. Choose according to the type of snowboard.

(1) Racing board (hard shoe board)

The racing board is relatively narrow, and the angle has a great relationship with the size of shoes. The general selection principle is to set the angle of the anchor first: let the toe slightly extend out of the edge of the board, and the heel just falls on the edge, which is convenient for exerting pressure on the edge of the board. As for the angle of the front fixer, you can feel, adjust and choose the most comfortable configuration by adding 8 degrees from the angle of the rear fixer at first.

For the racing board, the angle of the fixer is too small, which means that the body needs to twist to a great extent when doing large-scale carving and sliding, which is easy to fatigue and can not fully release the carving potential of the board. This sentence is not faithful to the original text, but is written by speculation, which needs to be confirmed by racing board players. If the angle of the handle is too large, the cutting edge is fine, but it is more difficult to control in the case of small bend or even middle bend.

(2) Free board or chasing board (soft shoe board)

You can choose duck posture or leaning forward posture according to your personal preference. No matter which standing position you choose, you should make your knees face the direction of the fixer as much as possible, so that you are easy to get hurt when you deliberately twist (pay special attention to safety when practicing Japanese lettering and duck-standing skating or standing with your hind feet at 0 degrees).

The advantage of duck stance is that on the one hand, it is convenient to squat naturally, reduce the center of gravity and improve the stability, on the other hand, it is convenient to practice anti-foot. Stand forward, with your knees facing the anchor and your eyes naturally facing the board head, which is relatively more suitable for sliding.

3. Installation method and steps of ski veneer fixer

1. Combine the rear fixer and the snow rake into a plane connection.

2. Open the lock button of the front retainer, pull the front retainer out of the front of the slide rail and lock it.

3. Open the lock button of the rear fixer, pull the combination of the snow rake and the rear fixer out from the rear of the slide rail and lock it.

4. Find out the shell size of snowshoes, and adjust the position of front and rear fixers according to the shell size.

5. Put the snowshoes in the fixer and try to see if they fit. The appropriate standard is that the snowshoe can be held just right, and the snowshoe does not sway.

6. Adjust the DIN value according to individual circumstances.