How to spray paint varnish with good effect

The first pass is semi-dry and semi-wet spraying. Don't spray it too thick and too bright. Spray for the second time every 5~ 10 minutes or so (depending on the ambient temperature). Use wet spraying for the second time. The speed is slightly slow and even, and the sprayed effect looks thick and smooth with high brightness. Check the smoothness and fullness of the paint film.

If you feel that the brightness can't be reached, spray it for the third time, and pay attention to the sag problem. High-consistency varnish can generally achieve the effect of twice. In addition, it is necessary to adjust the distance, spraying range and air pressure of the spray gun, which depends on the difference of spray gun and process.

Matters needing attention in automobile painting

If the varnish on the surface is scratched and the color paint is fine, then the treatment method is simple, just go to the beauty shop to polish it. Even if there is no scratch, it can be polished if spiral lines are found on the surface of the car paint. But be careful not to polish the same area frequently, or the varnish will become thinner and thinner.

If you break the paint, you need to mend it. If the scratches or spots are small and not particularly obvious, you can buy a touch-up pen to paint them. If it is obvious that the car body is deformed, you should go to the quick repair shop to do sheet metal and touch up the paint.

Refer to the above? People's Network-There are tricks to the daily maintenance and simple touch-up method of car paint.