A complete collection of production methods of silver carp and bighead carp fishing line group

A complete set of production methods for the line group of silver carp and bighead carp fishing with reverse bottom;

First, production

1) wallpaper Cut the foam to the same inner diameter as the curling iron and embed it in the curling iron.

2) Tie six hooks.

3) The copper wire 10cm is wound around (for fixing the sub-wires), and the copper wire10 cm is wound around (for connecting large wires).

4) Six small copper rings (used for hooks) are fixed at the bottom of the curling iron in six equal parts.

5) Fix six steel wires through the middle ring. Then put the hooks through the six hook holes respectively.

6) Pass the copper wire through the center of the circular foam, add a slightly harder plastic gasket on it, and then twist the copper wire into a circle next to the gasket. The whole bottom floating fishing group is completed.

Second, connection

1) First, put a bigger space bean on the long line of the sea pole (the lower positioning of the lead pendant).

2) Pass through the sliding lead pendant (a sliding pin should be hung on the lead pendant, which is available in fishing gear shops).

3) Connect the big rope to the connecting ring of the fishing group, and the fishing group will be connected.

Third, usage

1) Adjust the required fishing shed (it takes several adjustments to find the swimming layer of silver carp and bighead carp, which is shallow at high temperature and deep at low temperature).

2) Wrap the prepared bait evenly outside the curling iron and press it by hand.

3) Bait recommendation: Dong Jun crucian carp 65%, silver carp (or other silver carp bait) 20% white powder 5% sticky powder (or white flour) 10%.

4) Like throwing a sea pole, check whether the distance between hooks, lines and drops is entangled.

5) Swing the rod tightly, hang the alarm bell and call it a day.