What is the small coup of ceramic punching?

1. Determine the drilling position: paste adhesive tape on the ceramic drilling position and draw a cross on it to determine.

2. Choose a good drill: you can choose a glass drill or an all-ceramic drill.

3. Electric hammer drilling: firstly, drill holes on the surface of ceramic tiles at a low speed with a speed regulating electric hammer, and then accelerate after entering to avoid ceramic damage.

4. Water spraying: continuous water spraying during drilling can avoid ceramic tile cracking caused by temperature rise.

Matters needing attention in drilling ceramic tile wall

1. When all tiles are drilled, water needs to be added while drilling, and water can only be added after the tiles are cooled.

2. If the ceramic tile is cracked seriously, it can be repaired with toothpaste. Find toothpaste with the same color as the ceramic tile, squeeze out some and spread it evenly on the gap. Then clean the excess toothpaste, and when the toothpaste is dry, the cracks can be hidden.

3. When drilling expansion bolts for ceramic tiles, the width of the holes should be selected according to the size of the bolts.