What is the starting course of electric vehicles in Yadea?

1. Insert the key into the lock hole of the car and turn it to the front panel to light it up.

2. Straighten the car, sit in the car, support the ground with your feet or one foot, and control the speed of the car from small to large with your right hand after sitting. After the tram goes, please adjust the speed according to the traffic situation and your own feelings.

3. When there is an obstacle ahead, release the throttle. According to the speed and current situation of the vehicle, the left hand and the rear wheel cooperate with the brake to slow down, and the right hand is the front wheel brake lever.

Extended data:

Matters needing attention

1. Drivers should always check the plug-in points of electric vehicles to prevent the contact points from generating sparks and heating due to poor contact, and avoid short circuit and cross-line accidents caused by aging and wear of lines.

2. During the normal use of electric vehicles, various faults often occur. Professional maintenance personnel should be selected during maintenance, and maintenance should not be dismantled without authorization to ensure that the electrical circuits and protection devices are in good condition and effective.

Don't put the electric car in the aisle or stairwell to charge. In case of fire, fire and smoke will block the safety exits and escape routes of buildings, and people cannot evacuate quickly.

4. Pedals should be used to assist the electric vehicle in starting and climbing, so as to prevent the motor coil, circuit, battery and governor from overheating and damaging internal parts due to excessive starting current and long-term overload work of parts.