How to change the hand-cranked stone mill to low voltage electric change

According to the love of sourcing, the process of changing the hand-cranked stone grinding to low voltage electric is as follows:

1, dismantle the manual stone grinding: dismantle the manual stone grinding part, take out the stone in it and clean it. If there are metal parts installed on the manual stone mill, you need to use hand tools or power tools to dismantle it and clean it.

2, install the motor and belt: install the purchased motor and belt to the manual stone mill, when choosing the motor, according to the size and quality of the stone mill. Generally speaking, a 300-watt to 500-watt motor can meet the needs of most families. In addition, when choosing the belt, it is necessary to make sure that the rotation of the motor and the stone mill are matched to ensure smooth rotation. After that, it needs to be fixed using tools such as screws and nuts. Ensure that the belt connection between the motor and the stone mill is reliable and the belt tension is appropriate to ensure that the motor can drive the stone mill smoothly.

3, test the machine: after completing the transformation, you need to test the machine to see if it runs properly. You can put some grains or beans into the stone mill for test grinding to check whether the grinding effect is normal.