In 1990s, FAW Pingtou Chai liberated CA 1 12 1J truck.

1In May, 1995, the third generation of five-ton flat-headed diesel truck was officially put into production, carrying CA6 15 1 1B? 160 HP naturally aspirated diesel engine can output the maximum torque of 43 1N.m at the speed of 1800-2000 rpm. This engine is an improved CA6 1 10 diesel engine.

Faw liberation ca11121truck.

After the launch of the third generation flat-headed diesel engine, Jiefang redesigned a new flat-headed diesel vehicle, adopting Mitsubishi FM cab which is 230mm wider than FK series cab, equipped with improved CA6110/25 and CA61125.

Jiefang CA 1 12 1J is a 6-ton truck built on the basis of the third generation flat-headed firewood. The integrated windshield has a good view, the cleaning area of the three sets of wipers is larger, and the external swing mirror has a comprehensive view.

The word "liberation" in front of the car has been lost, but the word "FAW" on the air intake grille is clearly visible, and there is a hidden trailer hook on the pedal in the middle of the bumper.

The vehicle is driving at 4×2, and the windows on both sides of the cab are composed of three pieces of glass, and the small glass at the top can be opened. Bicycle pedals are non-slip, but the high ground clearance is inconvenient. The battery on the side of this car was removed.

The white nameplate "CA 1 12 10J" of the vehicle model under the left window outside the cab.

You can see the driver's seat at a glance when you open the door. There are pedal handrails on both sides of the door, and Xi 'an Huatai mechanical spring damping seat is assembled. The steering wheel can be adjusted, and the air conditioning outlet is on the central control panel.

The classic FAW flying wing two-piece steering wheel has a diameter of 50 cm, and the small FAW LOGO is engraved in the middle of the steering wheel.

1 Big 5 small dashboard with FAW logo in the middle.

The cab is a single-row three-seat night cab, and the co-pilot seat is two single person sofa seats. Because it is not a flat-floor cab, the middle seat is installed on the hood and there is a sleeper behind the seat.

The sleeper has a side window and a rear windshield, with a good view. In addition, the fully enclosed gauze curtain ensures the privacy during rest, and the barbed wire protection is added outside the back window.

The vehicle is equipped with CA 6110/125Z1A2 inline six-cylinder water-cooled direct injection supercharged diesel engine, with piston stroke1/cm, cylinder diameter 125kW and displacement of 7./KLOC.

The body size is 7.25m long, 2.49m wide, 2.63m high (no load), the wheelbase is 4.09m, the maximum loading mass is 6 tons, the maximum traction mass 12 tons, and the vehicle curb weight is 5.5 1 ton.

The front suspension is an I-beam, equipped with multiple leaf spring dampers, and the maximum load-bearing capacity of the front axle is 4 tons. The vehicle air horn is suspended at the bottom of the vehicle and in front of the engine radiator. The front and rear are drum brakes, the inner diameter of the brake drum is 40 cm, and the widths of the front and rear shoes are 10 cm and 15 cm respectively.

The rear suspension adopts multiple leaf springs for shock absorption, and is cast as the rear axle housing of the drive axle as a whole, with the maximum bearing capacity of 7.5 1 ton. The maximum speed of the vehicle is 95km/h, the maximum gradient is 35% (the road gradient is about 19.29 degrees), the designed fuel consumption per 100 kilometers 17.5 liters, and the minimum ground clearance is 26.5 cm, so the vehicle is not suitable for off-road transportation.

Vehicles use Delta 9.00-20 tires, and the front wheels use metal plates attached to the bottom of the cab as fenders.

The rear wheel is supported by twin tires, and the metal plate is attached to the car body as the rear fender.

There are traditional "big nose" metal fuel tanks on both sides of the car body, which can provide the vehicle with a cruising range of 1450km. The metal railing outside can not only protect the fuel tank, but also serve as an auxiliary pedal. A pedal is designed near the front of the car body.

This model is highly adaptable. Later, in order to adapt to the extreme road conditions in the northwest, FAW specially customized a number of cars, which is the famous liberation "Northwest King".

This article comes from car home, the author of the car manufacturer, and does not represent car home's position.