How to deal with chimney blockage of wall-hung boiler

The chimney blockage of wall-hung boiler is a common and serious problem. If it is not solved in time, it will not only affect the normal use of wall-hung boilers, but also cause safety hazards such as fires. Here are the reasons and treatment methods for the chimney blockage of wall-hung boilers.

cause

1, the flue has accumulated a lot of dust and other substances because it has not been cleaned for a long time.

2, the flue is too small or tortuous, which is easy to cause accumulation and flue blockage in normal flue gas circulation.

3. Improper use, such as improper use of fuel or insufficient fuel combustion, will lead to excessive carbon deposition in the flue and blockage.

job operation

1, use professional flue cleaning tools to remove all dust and dust. In order to avoid scratching the flue surface, it is best to use soft materials such as flannel and soft brush when cleaning.

2. When using the wall-hung boiler, it is necessary to control the combustion temperature and the type of fuel, and try to avoid using materials that are easy to cause dust accumulation in the flue.

3, regularly check the status of the flue, and regularly clean up once, to prevent excessive accumulation of dust and other impurities in the flue.

4. Installation of anti-reversal device for flue can avoid flue backflow and reduce flue dust accumulation under the condition of excessive wind.

In short, the chimney blockage of wall-hung boiler is a very serious problem, which needs to be solved in time. If you find this problem, you should immediately contact professional wall-hung boiler maintenance personnel to deal with it, so as to ensure the safety of the family and the convenience of use.