What are the configurations and characteristics of hydraulic lifting columns?

The sealing top and glass rubber strip of the movable telescopic door are two key parts of sealing and heat preservation. If it is aging or loose, it should be replaced in time.

What are the configurations of electro-hydraulic lifting columns commonly used at the door of the unit? In the next article, let's get to know each other with a good start.

1. Power system: battery DC power supply, single-phase or three-phase power supply, diesel engine.

2. Walking: assisted self-walking, two-wheeled traction, self-walking, car modification. What are the common configurations of electro-hydraulic lifting columns?

3. Legs: mechanical legs, hydraulic legs, ordinary hand-cranked legs and drawable legs.

4. Control system: explosion-proof electrical control system, remote control system and PIC control system.

5. Hydraulic pump stations: domestic special pumping stations for lifting platforms and Italian imported pumping stations.

6. External protective devices: organ cover type, mesh type and iron plate sealing type.

What are the characteristics of automatic lifting columns?

1, fast and easy: the fastest lifting time can reach 3 seconds, which is much longer than the same pneumatic lifting column, which is very valuable. Lifting columns should be used for three purposes: architecture, safety and landscape. All bollards can be used for architecture and landscaping, but only for style, shape and materials. When it comes to safety applications, different bollards are used to block different objects. Because of the hydraulic drive unit, the movement is soft and stable, which well solves the problem that the traditional pneumatic lifting column is noisy due to the air pump.

2. Agile control: The control unit adopts multifunctional logic controller, which can modulate a variety of different functional modes to meet the different functional requirements of different users. Lifting columns should be used for three purposes: architecture, safety and landscape. All bollards can be used for architecture and landscaping, but only for style, shape and materials. When it comes to safety applications, different bollards are used to block different objects. In addition, it is worth mentioning that its motion stroke is designed with adjustable timing, so users can freely control the lifting height of the column, effectively saving energy.

3. Unique structure: the core part of the hydraulic unit is integrated with the mechanical power mechanism, which can efficiently transfer mechanical energy to the hydraulic drive unit. The unique design and excellent performance of hydraulic unit to achieve pressure increase are rare in the same field at home and abroad.

Beijing Jinyang Jiu Feng Science and Technology Development Co., Ltd.

Professional facade image expert

10 focuses on one-stop door system solutions.

4. Safe and reliable: In case of emergency such as power failure, you can manually turn on the emergency descent button, lower the column to open the passage and release the vehicle. The upper and lower parts of the internal fixing mechanism are respectively equipped with current detection sensors and electromagnetic sensors, which realize the over-current protection of the power unit and the effective limit of the column action, and the operation is stable and reliable.

5. Economical and practical: As the automatic lifting column itself is a hydraulic transmission integrated mode, it is environment-friendly and energy-saving, with low energy consumption, lower failure rate, longer service life and lower maintenance cost. In addition, the installation and maintenance are simpler and faster by adopting the design of non-traditional guiding mechanism.