About fishing drift to find the bottom, change bait after the drift method

Fishing with meat bait (earthworms/red worms/meat buns) drifting without a fishing line, fishing a little ding dong; spring/winter fishing with a fishing line, fishing ding dong; summer/autumn fishing ding dong;

Fishing with vegetarian bait (homemade bait/commercial bait) drifting with a fishing line, fishing a ding dong;

Steps in a nutshell:

1.Wrap a large amount of lead in the lead holder, and pull the float to a distance of 10~15 centimeters from the hook or the eight-ringed loop; throw it to the fishing point; if the float sinks completely, then proceed to the second step; if the float does not sink completely, you can add more lead or judge the water depth. fishing point, if the float is completely submerged, then the second step; if the float is not completely submerged, you can add more lead, or to determine the depth of the water is too shallow;

2, move up the float until thrown to the fishing point to reveal a 1 eye or red tip, and now the floating tip of the float to the distance between the lead seat is the depth of the water for the third step; (measure the depth of the water need to be wrapped with a large lead lead seat lying on the bottom of the measurements); leave a space bean record If you pull the float up, you will be fishing for a pause; if you pull the float down, you will be fishing for a spirit;

4. Put a large piece of lead skin on the upper hook of the double hooks that you have just trimmed off, and throw it to the fishing point to find the bottom, and confirm the coarse jigging aim; (the underwater situation is that the upper hook's lead skin is touching the bottom, and the lower hook is laying on the bottom);

5. Remove the lead skin on the hooks, and hang a bait on the upper hooks, and throw it to the fishing point to reach the fishing aim of the (fourth) step by adjusting the position of the float up and down;

6. p>

6, start fishing normally;

Generally after fishing for 1 hour, you need to correct the float once more by pulling the float down to half water; because both the float and the line set will have a slight draft.